Jump to content

Building

From shop setup, to materials and tools, to all-out construction -- you'll find it here.

  • Filter topics by forum
    1. AusEracer

      CNC Main Wing and Canard Suppliers

      By AusEracer, in Materials
    3. Byang

      Corning Foamular 250 for Winglets

      By Byang, in Materials
    4. Kent Ashton

      Kent's Long-EZ project 1 2 3 4 35

      By Kent Ashton, in Builder Progress Reports & Motivation
    5. Aclouston

      Higher level of cg understanding

      By Aclouston, in General Construction
    6. kaylee s

      N97EZ Rebuild

      By kaylee s, in Builder Progress Reports & Motivation
    7. Aclouston

      Leak-proof gas tank

      By Aclouston, in General Construction
    8. sherif

      Post cure heat treatment after long time

      By sherif, in General Construction
    9. sherif

      beginner question: cutting UNI glass for cozy seatback

      By sherif, in General Construction
    10. sherif

      Comparing different epoxy kits

      By sherif, in Materials
    11. Aclouston

      Stiffer main gear for the long-EZ

      By Aclouston, in General Construction
    12. Aclouston

      Hot wire cutting

      By Aclouston, in General Construction
    13. lscotese

      Engine baffles

      By lscotese, in General Construction
    14. TParker

      TParker Long-EZ Rebuild 1 2

      By TParker, in Builder Progress Reports & Motivation
    15. edwisch

      Hot foam cutter newbies

      By edwisch, in General Construction
    16. slk23

      Cowling mods

      By slk23, in Builder Progress Reports & Motivation
    17. towplane

      quickie engine problem solved

      By towplane, in Builder Progress Reports & Motivation   
    18. zolotiyeruki

      Moldless vs molded weight

      By zolotiyeruki, in General Construction
    19. Folkker

      CESSNA 172 ENGINE MOUNT

      By Folkker, in General Construction   
    20. Kent Ashton

      Kent's Propeller Thread 1 2

      By Kent Ashton, in Builder Tips
    21. mquinn6

      DarkAero composite course

      By mquinn6, in Builder Tips
    22. fusionfab

      Fuselage reinforcement bulkheads vs channels

      By fusionfab, in General Construction
    23. willflyformoney

      EZ-Poxy 87 Hardener

      By willflyformoney, in Materials
    24. Mike75

      Mounting O200A on Varieze

      By Mike75, in General Construction
    25. Jon Matcho

      My Quickie Q2 Project

      By Jon Matcho, in Builder Progress Reports & Motivation
    26. Ratdog

      Using Bondo as a filler

      By Ratdog, in Materials


    The Canard Zone

    ×
    ×
    • Create New...

    Important Information

      I accept