zolotiyeruki Posted April 4 Share Posted April 4 1985 RUTAN LONG EZ • $20,000 • FOR SALE BY OWNER • 1100 Hours, Lycoming 0-235-L2C, 2200 Engine Hours, 105 Hours Since Major Overhaul, Dynafocal Engine Mount, Task Strakes, NACA Cooling Inlet, Original GU Canard Airfoil, Electric Starter, 25AH Battery, Herb Sanders Wheel Pants, Kevlar Cowling and Exhaust System, 6” Prop Extension, Slick Magnetos, One Owner Since New, Complete Logbooks and Records, IFR Panel, Telex 720 Radio, Narco Nav 121/122 with GS/MB, No ADS-B In/Out, Not Flown or Maintained Since 2006, Engine Is Not Airworthy Due To The Potential Of Camshaft, Cylinder Or Other Component Corrosion. The Engine Needs To Be Overhauled. • Contact Mark McHenry , Owner - located Mclean, VA 22102 United States • Telephone: 7038627495 • Posted April 3, 2024 1 Quote Link to comment Share on other sites More sharing options...
Kent Ashton Posted April 4 Author Share Posted April 4 2 hours ago, zolotiyeruki said: 1985 RUTAN LONG EZ • $20,000 • FOR SALE BY OWNER • 1100 Hours, Lycoming 0-235-L2C, 2200 Engine Hours, 105 Hours Since Major Overhaul, Dynafocal Engine Mount, Task Strakes, NACA Cooling Inlet, Original GU Canard Airfoil, Electric Starter, 25AH Battery, Herb Sanders Wheel Pants, Kevlar Cowling and Exhaust System, 6” Prop Extension, Slick Magnetos, One Owner Since New, Complete Logbooks and Records, IFR Panel, Telex 720 Radio, Narco Nav 121/122 with GS/MB, No ADS-B In/Out, Not Flown or Maintained Since 2006, Engine Is Not Airworthy Due To The Potential Of Camshaft, Cylinder Or Other Component Corrosion. The Engine Needs To Be Overhauled. • Contact Mark McHenry , Owner - located Mclean, VA 22102 United States • Telephone: 7038627495 • Posted April 3, 2024 I don't think you can find an EZ much cheaper than this. I has not flown since 2006 (yikes, 18 years!) but what the heck. Only 105 hours since some sort of overhaul. Get the logs, figure what was done to the engine. Maybe it will be flyable with minimal work (or no work). You hope it was hangared. If so it could be a great buy. Quote -KentCozy IV N13AM-750 hrs, Long-EZ-85 hrs and sold Link to comment Share on other sites More sharing options...
zolotiyeruki Posted April 5 Share Posted April 5 (edited) A previously-flying TriQ for $3,000, including VW engine https://www.facebook.com/marketplace/item/1433603770604610/ Looks like it's been disassembled and some animals made their home inside... Edited April 5 by zolotiyeruki Quote Link to comment Share on other sites More sharing options...
Jon Matcho Posted April 6 Share Posted April 6 14 hours ago, zolotiyeruki said: A previously-flying TriQ… Not a TriQ but a Dragonfly. Similar types, but different aircraft. Quote Jon Matcho Builder & Canard Zone Admin Now: Rebuilding Quickie Tri-Q200 N479E Next: Resume building a Cozy Mark IV Link to comment Share on other sites More sharing options...
zolotiyeruki Posted April 9 Share Posted April 9 On 4/6/2024 at 6:44 AM, Jon Matcho said: Not a TriQ but a Dragonfly. Similar types, but different aircraft. Ah, thanks for the correction 1 Quote Link to comment Share on other sites More sharing options...
zolotiyeruki Posted April 9 Share Posted April 9 LONG EZ PROJECT SAN DIEGO CA • $15,000 • ACCEPTING OFFERS • Long Ez project. Seller/builder retired A&P mechanic and military pilot. Gillespie field SEE in SAN • Contact Ray Moore , Friend of Owner - located San Diego, CA 92071 United States • Telephone: ---------- • Posted April 7, 2024 Quote Link to comment Share on other sites More sharing options...
zolotiyeruki Posted April 12 Share Posted April 12 Another Varieze project: https://www.facebook.com/groups/25741482604/?multi_permalinks=10160578526397605 No price or location listed. Quote Link to comment Share on other sites More sharing options...
zolotiyeruki Posted April 18 Share Posted April 18 Quote RUTAN LONG EZ PARTS • MAKE OFFER • Long ez wings roncz canard need filled and sanded. Melville carbon cowl pickup only • Contact Jamie Hicks , Owner - located Franklin, OH 45005 United States • Posted April 17, 2024 Quote Link to comment Share on other sites More sharing options...
tfulwider Posted April 23 Share Posted April 23 (edited) San Diego Craigslist: Quote Long Ez project for sale. Owner/Builder retired military Pilot and A&P. Airframe with no Engine. Also no instruments $10,000 FIRM PRICE I am a friend of the seller and posting this ad for him. https://losangeles.craigslist.org/wst/avo/d/el-cajon-long-ez-project/7734962837.html Edited April 23 by tfulwider Quote Link to comment Share on other sites More sharing options...
zolotiyeruki Posted April 28 Share Posted April 28 https://www.facebook.com/groups/25741482604/?multi_permalinks=10160601233507605& Quote Link to comment Share on other sites More sharing options...
zolotiyeruki Posted May 1 Share Posted May 1 https://www.barnstormers.com/classified-1878370-Tri-Q-200.html?catid=18671 Quote Link to comment Share on other sites More sharing options...
Midengineracer Posted May 1 Share Posted May 1 10 minutes ago, zolotiyeruki said: https://www.barnstormers.com/classified-1878370-Tri-Q-200.html?catid=18671 I saw this. The line about gross weight bothers me. Also, what did extending each wing 20" do to the stall? Is the front going to stall early enough from the rear to have a proper safety margin? It's interesting, but those things kind of scare me away from it. Quote Link to comment Share on other sites More sharing options...
zolotiyeruki Posted May 2 Share Posted May 2 (edited) Over on HBA, someone is GIVING AWAY a Dragonfly project in Alabama: https://www.homebuiltairplanes.com/forums/threads/90-complete-90-to-go-viking-dragonfly-mki-free-to-a-good-home-tuscaloosa-al.49724/ Edited May 2 by zolotiyeruki Quote Link to comment Share on other sites More sharing options...
zolotiyeruki Posted May 2 Share Posted May 2 https://www.facebook.com/groups/396072647580556/?multi_permalinks=1854400018414471 Quote Greetings all! I have a Long-EZ for sale as well as a Cozy MK project - see photos. Located in NORTHWEST ARKANSAS. I have no engine or aircraft logs. Engine will need to be rebuilt. Asking prices are NEGOTIABLE- will accept and entertain ALL offers. 1989 Long-EZ - $39,500 Been sitting in the hanger for 10+ years. Electric nose gear - needs attention - currently stuck in up position. Landing gear (wheels/brakes) need attention Last flown around 2011-ish Lycoming 160hp Clean interior Clean exterior I aquired this plane and have only bill of sale - this plane would be great for experienced builder or engine mechanic. Cozy MK - $15,500 Aquired this and have no build documents. Looks to be 50% complete. See photos. Lots more photos at the link. The Long-EZ is N775AM. The Cozy is a mostly-structurally-complete, with the nose/canopy/turtledeck needing some work still, and of course engine and instruments. Quote Link to comment Share on other sites More sharing options...
zolotiyeruki Posted May 2 Share Posted May 2 Gee whiz, it's a busy day for projects. This one's a mostly-complete airframe for $5k: https://www.facebook.com/groups/25741482604/?multi_permalinks=10160607404422605&hoisted_section_header_type=recently_seen&__cft__[0]=AZW_dfPpq57I2tIFA9viSfds_mOXrneI7G_KsDjvlwI15SoFVQ_MnV8L2aHiMkpLxNWJwVkfNmZa-4oQDMweTHlzNsHMqcHU35jbXIF0smA5Pz3XKn0iqs4o_zm2A16WosrG88d9VQ3At-FeRw-p9_O1g2Gpgtpp1z561QoCwgQkUtIaLcG0EXrP0OQMKKKTo5rW2F9mJHHzxz8yNtXYPkGNBmtEeFnn3AqOLS7fl3I8Jg&__tn__=%2CO%2CP-R Quote I have a longeze project for sale for what i have into it in utah 5000$ . This is a 90% complete 90% to go . Controls hooked up primed and partially painted , electric gear , strobes and nav installed engine mount , brakes all hooked up cowls , exhaust . Needs instruments , more paint , engine . Not ronz canard . No build logs but does have plans . I bought this and subsequently bought a registered varieze that needs a new engine and decided with other issues i have no time for it . Update ! Some people are panicking because they think the interior fuselage is exposed blue foam . Its not look at the photos its glassed properly and painted blue ! Quote Link to comment Share on other sites More sharing options...
Kent Ashton Posted May 4 Author Share Posted May 4 Seeing discussion of this EZ on FB. As usual, lots of B.S. there. It took a couple searches to find it, apparently near Santa Ynez, CA. https://www.airport-data.com/aircraft/N41AN.html Looks nice but the pic is old, I'm guessing $20-25K would be a fair price. Quote -KentCozy IV N13AM-750 hrs, Long-EZ-85 hrs and sold Link to comment Share on other sites More sharing options...
zolotiyeruki Posted May 5 Share Posted May 5 On Facebook: https://www.facebook.com/groups/770671256385607/?multi_permalinks=7503265726459426&hoisted_section_header_type=recently_seen&__cft__[0]=AZX5tRmooiW2O4IfwAn4lVuRpT-vUEnzamlHPY7W_dv5mEi6zh1tkYSLyCjCcY3BDrMSqZR_g-F-xsVd0wPciMHqNWsZ1Jky7WGvP5BO-ZfDtU19j56HN7XefL6XeGNeVbLbe9k5mkSlWcNG4sJ5rXxr2qFtHyTg5q6ZUHp5W0w4yO7sVZd51Ypf4EzF2Jm4gdvu9fJMK-3Xx_Uz_2gfZz5r9agoXc98KtZvQsT42lrWOA&__tn__=%2CO%2CP-R Quote Huge opportunity to save many thousands of dollars and years and years of building! For sale: My Aerocanard SX (mold built Cozy MK IV with larger rear seat), Serial # 50 unfinished, unregistered kit. It is Close to painting stage. Fully IFR with electric actuating and self-locking FHC, electric trim and electric auto-retract landing brake. Wings/canard/ spar by Oeleman. Wilhelmson Electric nose gear, liquid (water or oil) cabin heat. This project is currently set up for a converted Mazda Renesis rotary engine utilizing Real World PRSU and electronics with a C/S 3 blade Magnum Ivoprop. Being composite it can be somewhat easily converted to a powerplant with cylinders. If so, it will need a new cowl. I am selling it with or without the engine, engine mount, prop, engine electronics fuel pumps and cooling/oil system. It is located in my heated hanger at ENW, (Kenosha Wisconsin) Where I was building it. (never below 50* since birth.) Pix and stats available if interested Interested please contact me at 312/848-5755—lets talk! Quote Link to comment Share on other sites More sharing options...
zolotiyeruki Posted May 6 Share Posted May 6 1982 O-200 VARIEZE • $35,000 • MAKE OFFER • 1982 Rutan Varieze 935hrs TTAF, O-200 ~450 SMOH, Prince Propeller, Bendix/King GPS/Com, Terra compact Transponder, VFR night airplane, new LED lighting, recently restored by Long EZ builder, freshly painted, tinted canopy, Wright electric nose gear, electric starter. Cleveland wheels and brakes, lamb tires, Hertzler wheel pants, P-Mag ignition on one side and magneto on the other. Excellent time builder or cross country airplane. 145kts at 6GPH, you can't go that far for this cheap any other way. Text or call. • Contact Tanner Ewing , Owner - located Ashland, OH 44805 United States • Telephone: ---------- • Posted May 4, 2024 2015 COZY-3 (IFR) • $55,000 • BEST DEAL EVER! • 410.1 TTAF&E TSMO,0320-B2C (160HP),IGN 1Surefly 1Bendix,Carb,Silver Bullitt Prop,Rain Canard,ZFW (1041), UPDATED All Garmin Panel,G-175,G3X,Auto Pilot ADSB In/OUT,Bluetooth, Elec Nose Lift,Trim,Speedbreak, Big breaks and much more! Flying,Always Hangared and Pamperd. Checkout my Walkaround ..Long Ez Pilot..Garee Cozy III for sale. • Contact Greg Garee - DD-3 AVIATION LLC , Owner - located Bonaire, GA 31005 United States • Telephone: 9187109380 • Posted May 3, 2024 Quote Link to comment Share on other sites More sharing options...
zolotiyeruki Posted May 12 Share Posted May 12 This is a repost, but I think it's a price drop: Most of the fiberglass work done on an Long-EZ for $3k. That said, you'd probably want to build a new canard (the included one is a GU), and some of the layups look....wavy? Quote LONG-EZ PROJECT • $3,000 • PROJECT FOR SALE • GU canard, Task Strakes, Plans, Cleveland Brakes. Canopy was done with West Systems, bubble is green tinted. $5000 located in East Tennessee. • Contact Mac McEntire , Owner - located Kingsport, TN 37660 United States • Telephone: ---------- • Posted May 11, 2024 Quote Link to comment Share on other sites More sharing options...
Kent Ashton Posted May 12 Author Share Posted May 12 2 hours ago, zolotiyeruki said: This is a repost, but I think it's a price drop: Most of the fiberglass work done on an Long-EZ for $3k. That said, you'd probably want to build a new canard (the included one is a GU), and some of the layups look....wavy? I bet there is $15,000 worth of materials in this project and 1000 hours of free labor. $1000 each for wheels and brakes, cowls, preformed strakes, canopy. Easily several thousand for epoxy, glass, hardware and foam. What a deal!! Many years ago, I recall paying about $2K for a tub and some foam. At a measly $20/hour, you're buying $20,000 of free labor. It's like finding a Picaso on the curb. Quote -KentCozy IV N13AM-750 hrs, Long-EZ-85 hrs and sold Link to comment Share on other sites More sharing options...
Aclouston Posted May 12 Share Posted May 12 Wow! This could be the one. Can you tell for which engine the cowl is for? The strakes are prefab units right? Quote Link to comment Share on other sites More sharing options...
tfulwider Posted May 12 Share Posted May 12 Is it just me or does a fair amount of the surface look resin lean? Quote Link to comment Share on other sites More sharing options...
Midengineracer Posted May 13 Share Posted May 13 1 hour ago, tfulwider said: Is it just me or does a fair amount of the surface look resin lean? Not to me, from the pictures here. Quote Link to comment Share on other sites More sharing options...
Voidhawk9 Posted May 13 Share Posted May 13 Maybe peel-ply and / or unfinished surfaces. But couldn't be certain from the photos. Quote Aerocanard (modified) SN:ACPB-0226 (Chapter 8) Canardspeed.com (my build log and more; usually lags behind actual progress)Flight simulator (X-plane) flight model master: X-Aerodynamics (GMT+12) Link to comment Share on other sites More sharing options...
Marc Zeitlin Posted May 13 Share Posted May 13 2 hours ago, tfulwider said: Is it just me or does a fair amount of the surface look resin lean? It is not possible to tell the quality of layups from pictures. It MAY be possible to tell if the layups are really lousy, but there's no way to tell wet, dry, or marginal layups from pics. I've seen pics that looked fantastic, and when I saw the plane in person the layups were marginal at best. Conversely, I've seen pics that made me very doubtful, but when I saw the plane in person everything was completely acceptable and decent quality. So, do not believe for a second that you can tell the quality of layups by some pics on Barnstormers. You're doing well if you can judge contouring by light reflections in pics, but that's about as far as it goes. Quote Marc J. Zeitlin Burnside Aerospace marc_zeitlin@alum.mit.edu www.cozybuilders.org copyright © 2024 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.