Limo EZ Posted November 8, 2008 Posted November 8, 2008 I finally got most of the paint on. still have color sanding and some trim to do like the canard tips and a stripe on the side. Joe Quote
Jack Morrison Posted November 8, 2008 Posted November 8, 2008 Looking great Joe, takes a lot of patience and hard work. Keep it going. Jack E Racer Extreme Quote
airwrench Posted November 8, 2008 Posted November 8, 2008 icing the cake!! Its all downhill from here Quote
TMann Posted November 8, 2008 Posted November 8, 2008 Joe ........ That's really turning out great! (I'm green with envy! ) Quote T Mann - Loooong-EZ/20B Infinity R/G Chpts 18 Velocity/RG N951TM Mann's Airplane Factory We add rocket's to everything! 4, 5, 6, 7, 8. 9, 10, 14, 19, 20 Done
Lifessamsara Posted November 8, 2008 Posted November 8, 2008 Great work Joe, It's great to see your project come to life! At this rate it will transition from project to being an aircraft sooner than you know Cheers, Bruce. Quote
Limo EZ Posted November 8, 2008 Author Posted November 8, 2008 Thanks for the encouragement and it is a long way to go. I took more pics outside but winter is here so I don't think I can do much more painting. The blue is more toward the teal side. Joe Quote
Big Steve Posted November 8, 2008 Posted November 8, 2008 Joe: The project is really comming along. Your place looks very similar to mine. I have a corn field on my west side too. I also have a John Deere Lawn mower. Did you build the plane in that garage in the picture? You keep it up and you could be flying by spring. STeve build on Quote Steve Harmon Lovin Life in Idaho Cozy IV Plans #1466 N232CZ http://websites.expercraft.com/bigsteve/ Working on Chapter 19,21
Edge 513 Posted November 8, 2008 Posted November 8, 2008 Looks really GREAT! THink of all us poor buggers that are waaaay behind you, and all of the guys who flat gave up. You are really far along no matter how you slice it with whats ahead. KEEP IT UP!!!! Compared to the statistical 80% OF US BUILDERS AND WANNABEES....Sooner than later YOU'LL be flyin' that bird!!!!! Quote Self confessed Wingnut. Now think about it...wouldn't you rather LIVE your life, rather than watch someone else's, on Reality T.V.? Get up off that couch!!! =) Progress; Fuselage on all three, with outside and inside nearly complete. 8 inch extended nose. FHC done. Canard finished. ERacer wings done with blended winglets. IO540 starting rebuild. Mounting Spar. Starting strake ribs.
Limo EZ Posted November 8, 2008 Author Posted November 8, 2008 Thanks again. Steve yes I built the plane in the garage but had to stop as we removed the roof and put an addition on the house. That set me back one year. Next door neighbor owns the cornfiels and is a John Deere dealer. In the last pic you can see the taxiway to runway 7 at LPR. Now if I can get them to put a gate in the fence. Joe Quote
Big Steve Posted November 9, 2008 Posted November 9, 2008 Joe: That has got to be pretty darn cool to live that close to the airport and not have to put up with rich snotty neighbors who tell you what you can do on your own place. I bet the pheasant hunting is great in your neck of the woods. STeve build on Quote Steve Harmon Lovin Life in Idaho Cozy IV Plans #1466 N232CZ http://websites.expercraft.com/bigsteve/ Working on Chapter 19,21
Limo EZ Posted July 12, 2009 Author Posted July 12, 2009 Hi, Latest progress got the wings painted Joe Berki Quote
TMann Posted July 12, 2009 Posted July 12, 2009 It looks glossy! Quote T Mann - Loooong-EZ/20B Infinity R/G Chpts 18 Velocity/RG N951TM Mann's Airplane Factory We add rocket's to everything! 4, 5, 6, 7, 8. 9, 10, 14, 19, 20 Done
Limo EZ Posted July 25, 2009 Author Posted July 25, 2009 I am just about done with painting. Just some touch ups, small parts and wheel pants Joe Berki Quote
TMann Posted July 25, 2009 Posted July 25, 2009 Looks great Joe. That rotary sure maintains some clean lines. Quote T Mann - Loooong-EZ/20B Infinity R/G Chpts 18 Velocity/RG N951TM Mann's Airplane Factory We add rocket's to everything! 4, 5, 6, 7, 8. 9, 10, 14, 19, 20 Done
goatherder Posted July 28, 2009 Posted July 28, 2009 That is gonna be one wicked looking plane. Quote Marc Oppelt Olympia, WA http://picasaweb.google.com/oh.u8it2
Waiter Posted August 6, 2009 Posted August 6, 2009 Hey, If the weather holds up, I'll fly over to Norwalk (ohio) this Saturday (8 Aug) for their Planes and Cars flyin. Probably around 11am. I'll give you the name of the guy that did my vinyl graphics, Like, Real Cheap :-) Waiter Quote F16 performance on a Piper Cub budget LongEZ, 160hp, MT CS Prop, Downdraft cooling, Full retract visit: www.iflyez.com
TMann Posted August 6, 2009 Posted August 6, 2009 I'll give you the name of the guy that did my vinyl graphics, Like, Real Cheap :-) I got lucky in that department. My neighbor two doors down (who is also in my EAA chapter and is building a CX4) does this for a living out of his home based business. All I have to do is dream up a design. Quote T Mann - Loooong-EZ/20B Infinity R/G Chpts 18 Velocity/RG N951TM Mann's Airplane Factory We add rocket's to everything! 4, 5, 6, 7, 8. 9, 10, 14, 19, 20 Done
Limo EZ Posted August 6, 2009 Author Posted August 6, 2009 Waiter, If you are going to be at Norwalk on Saturday I will stop in. I would love to see your bird. Sunday there is a pancake breakfast at SKY Sandusky if you want to burn some more holes in the sky. I think I am done for the most part with painting but I will still need N numbers and such Thanks Joe Berki Limo EZ Quote
Waiter Posted August 6, 2009 Posted August 6, 2009 I wasn't aware of the SKY one. The only problem I have with SKY is the need to back taxi. When it gets busy, the people in the pattern won't extend their downwinds and allow planes to backtaxi and take off. ANyway, I may show up there on Sunday. TMann, Can he do multiple color? The guy I have can only cut single color (letters, logos, emblams, etc), but he can't color print on Vinyl. I got all my labels and 6 "Stars/Bars" for $65. Waiter Quote F16 performance on a Piper Cub budget LongEZ, 160hp, MT CS Prop, Downdraft cooling, Full retract visit: www.iflyez.com
Limo EZ Posted August 6, 2009 Author Posted August 6, 2009 Waiter, I know what you mean. I had to wait and be very careful when i flew my daughter in years ago in a Tramahawk. I drive there now as it becomes apparent build or fly but not both. Joe Quote
TMann Posted August 6, 2009 Posted August 6, 2009 TMann, Can he do multiple color? The guy I have can only cut single color (letters, logos, emblams, etc), but he can't color print on Vinyl. I got all my labels and 6 "Stars/Bars" for $65. Waiter Here's his site and contact information. He runs the QuickieBuilders.org site as well so he has some composite background. He's gone over to the dark side and is currently building a spam-can. http://www.asignabove.net/asav8_004.htm Quote T Mann - Loooong-EZ/20B Infinity R/G Chpts 18 Velocity/RG N951TM Mann's Airplane Factory We add rocket's to everything! 4, 5, 6, 7, 8. 9, 10, 14, 19, 20 Done
Limo EZ Posted August 13, 2009 Author Posted August 13, 2009 Waiter, Are you going to the pancake breakfast at Port Clinton this Sunday 16th? Joe Berki Quote
Waiter Posted August 13, 2009 Posted August 13, 2009 Didn't know they had one, but Yes. Is that PCW ?? Waiter Quote F16 performance on a Piper Cub budget LongEZ, 160hp, MT CS Prop, Downdraft cooling, Full retract visit: www.iflyez.com
Limo EZ Posted August 14, 2009 Author Posted August 14, 2009 Yes, The chapter is restoring a Ford Tri motor Joe Quote
Waiter Posted August 16, 2009 Posted August 16, 2009 Should be over there about 10 Waiter Quote F16 performance on a Piper Cub budget LongEZ, 160hp, MT CS Prop, Downdraft cooling, Full retract visit: www.iflyez.com
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.