wrc100 Posted March 3, 2020 Share Posted March 3, 2020 Are the Open EZ templates available for downloading? Quote Link to comment Share on other sites More sharing options...
Kent Ashton Posted March 4, 2020 Share Posted March 4, 2020 (edited) Hey, didn’t you ask that same question 13 years ago? 🙂 What happened? You finally paid off the mortgage? The divorce got finalized? https://www.canardzone.com/forums/topic/17223-open-ez-templates/ Edited March 4, 2020 by Kent Ashton Quote -KentCozy IV N13AM-750 hrs, Long-EZ-85 hrs and sold Link to comment Share on other sites More sharing options...
Countach74 Posted March 4, 2020 Share Posted March 4, 2020 Same exact day even 13 years ago!!!🙄 Quote Link to comment Share on other sites More sharing options...
Kent Ashton Posted March 4, 2020 Share Posted March 4, 2020 (edited) 1 hour ago, Countach74 said: Same exact day even 13 years ago!!!🙄 Submitted for your approval . . . one WRC100, stiil searching for plans . . . in the Twilight Zone. But seriously, Dub, they are here. Use the search: “open-ez”. We don’t have time to answer the same question every decade. 😜 Edited March 4, 2020 by Kent Ashton Quote -KentCozy IV N13AM-750 hrs, Long-EZ-85 hrs and sold Link to comment Share on other sites More sharing options...
Jon Matcho Posted March 5, 2020 Share Posted March 5, 2020 On 3/3/2020 at 5:00 PM, wrc100 said: Are the Open EZ templates available for downloading? Does everyone see the Downloads tab at the top of the screen? If not please let me know. Quote Jon Matcho Builder & Canard Zone Admin Now: Rebuilding Quickie Tri-Q200 N479E Next: Resume building a Cozy Mark IV Link to comment Share on other sites More sharing options...
Barry Posted March 8, 2020 Share Posted March 8, 2020 Now that's funny... I see the downloads Jon. 1 Quote Link to comment Share on other sites More sharing options...
Gecko Posted April 5, 2020 Share Posted April 5, 2020 Jon, Just curious if you still planning to update the Rev 5 drawings? You replied last fall that was the goal of a winter project. Thanks, Gecko Quote Link to comment Share on other sites More sharing options...
Kent Ashton Posted April 7, 2020 Share Posted April 7, 2020 I downloaded the Rev 5 drawings last year. They were spot on except some of the checking dimensions on the corners were a bit hard to read. As I recall, this was the thing Jon intended to fix. I printed mine at a Fedex store from a thumbdrive and they were correct. I think I printed from the PDF files. Quote -KentCozy IV N13AM-750 hrs, Long-EZ-85 hrs and sold Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.