Jump to content

Hennie Engelbrecht

Verified Members
 View Profile  See their activity

  • Posts

    91

  • Joined

  • Last visited

 Content Type 

Everything posted by Hennie Engelbrecht

  1. Hennie Engelbrecht
    Go to www dot clickbond dot com. You have to register. some great stuff Hennie
  2. Hennie Engelbrecht
    Happy Birthday Hennie E
  3. Hennie Engelbrecht
  4. Hennie Engelbrecht
    Great stuff parts looking good. Hennie
  5. Hennie Engelbrecht
    Do you know about the agent for MGS in Iron Bark... slightly expensive but available?
  6. Hennie Engelbrecht
  7. Hennie Engelbrecht
    All I came accross avery interesting article on the Gurit website titled "Guide to Composites: http://www.gurit.com/downloads.asp?section=000100010037&itemTitle=Brochure+Downloads Many comparisons are made between various materials and associated characteristics. Loads of good information! Hennie
  8. Hennie Engelbrecht
    Move to middle east and I guarantee you a 100 degrees or so Hennie
  9. Hennie Engelbrecht
  10. Hennie Engelbrecht
    hi Jon I looked at the air powered tool and allthough it is smaller and lighter and cheaper, I am worried aboul possible oil contamination on the workpiece. I think the electrical unit is the right tool. I have tried high speed cutters before. I will be buying a Fein variable speed soon
  11. Hennie Engelbrecht
    Spodman , do I understand correctly that you want to leave the peel-ply on the part? This item gets "peeled" off after cure to provide bonding surface. so you in fact reduce weight when using peelply Hennie E
  12. Hennie Engelbrecht
    Congratulations John
  13. Hennie Engelbrecht
    Thanks Jon Hennie
  14. Hennie Engelbrecht
  15. Hennie Engelbrecht
    I used the plasma spray coating process on the inside of plasma guns with great success. Reduced heatloss in the plasma a lot. Therefore reduced cooling requirements. The coating that I used was more exotic than one would need for exhaust pipes but I am sure you will see a big difference. http://www.flamesprayinc.com/coatings.htm has some information that can be useful.
  16. Hennie Engelbrecht
    Have a look at Jannie versfeld's website (Chapter 25). He has some very interesting photographs where his plane is fully assembled in a double garage. Wings are sticking out both sides http://qmain.tripod.com/new_page_25.htm

The Canard Zone

×
×
  • Create New...

Important Information

  I accept