dust Posted February 5, 2004 Share Posted February 5, 2004 OK here is my long list of mods that i have or *would have done *heat duct - make square - increases ability to flow air extend ducts to toe area *Change location of map pocket, bolts for elec air brake actuator go threw it in current position, slant it up to avoid this *make bulkheads for seatback wider to continue heat duct square section *floor 1" addition under heat duct and seat back brace has to be widened nose gear bulkheads, made two piece removable cover to stop air replace two canopy hinge with one continious that starts and stops before it protrudes hidden belhorns change profile of landing gear bow for less drag, non lift profile add layer of fine weave 3 oz glass to all fuel tank surfaces and moved bulkheads slighty for more fuel made flanges for top of fuel tanks to allow taping of joints and larger surface area for sealing increase elevator length, no i think i mean width by 1/4 inch wedge under turtle deck to increase height by 1 inch. short list enjoy the build dust Quote maker wood dust and shavings - foam and fiberglass dust and one day a cozy will pop out, enjoying the build i can be reached at http://www.canardcommunity.com/ Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.