Limo EZ Posted April 23, 2009 Share Posted April 23, 2009 Does anyone remember th layup for wheel pants? I believe it is 2 plies of BID, just want to verify. Joe Berki Limo EZ Quote Link to comment Share on other sites More sharing options...
steve Posted April 23, 2009 Share Posted April 23, 2009 Does anyone remember th layup for wheel pants? I believe it is 2 plies of BID, just want to verify. Joe Berki Limo EZ yep, ask never quit, he did a pair or two last month Quote Steve M. Parkins Link to comment Share on other sites More sharing options...
Neverquit Posted April 27, 2009 Share Posted April 27, 2009 Yep, it's two bid. Did you get the molds Joe? There should be some laminated instructions in the box. Quote Link to comment Share on other sites More sharing options...
Limo EZ Posted April 27, 2009 Author Share Posted April 27, 2009 I did not find instructions just the molds and cradle. I will go through the packing material again. I have a set of pants sides layed up with a two ply stripe where the cut line will go. Next step is to place them on the front / rear molds and joint the halves with 2 plies of bid stripe. I believe this is done after you cut the pant into 4 pieces. A lip needs to be placed on to the edge of the rear pant. I think Joe Quote Link to comment Share on other sites More sharing options...
Limo EZ Posted April 27, 2009 Author Share Posted April 27, 2009 I dug deeper into the packing material and found the instructions. I had the right idea. Joe Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.