Jump to content

Neverquit

Verified Members
  • Posts

    257
  • Joined

  • Last visited

Everything posted by Neverquit

  1. Greetings Wells, from East Michigan. You are quite an optimist. So I've been told the best way to make a million is to start with two million and make airplane parts or start an airlne. Well, you're in auto central and we both know how that's going. So, I wish you all the luck. Bottom line is if you like doing crafts in a big way, this is it. You get to play wth all the different types of materials and be a mechanic, electrician, and fabricator. Its the best plans built go-fast plane on the market hands down.
  2. HiGeez, Is the fan pushing the cool air through the oil heater or pulling heated air and forcing it to the front? Do you have a duct that runs all the way to the pilot's toes where it counts?
  3. Neverquit

    Day # 1

    Don't worry about the dogs or the luggage in the back. You'll be putting in a roll bar or something anyway, right? I read a lot about the big bubble expanding and contracting with the weather. I think a split in the middle helps control that. Either way, I put a bit larger rear windows in the back and there's lots of view. My kids will be playing on their laptops anyway.
  4. As Mark points out, it could be the photo or your sanding. Find an EAA expert in your area to look the plane over to build your confidence to move on. Making new aluminum plates and repairing that area or a few other areas is way easier than starting over.
  5. That's great! Erland, This beats a biplane or warbird from EAA any day (or month). Keep them coming. I look forward to it. Best photo of Scott's plane in my library yet.
  6. Naw, cause' its too expensive and too hazardous. Haven't seen a new chrome bumper for years. Dennis, if you need something polished though there's still a few around the Detroit area. You can send it to me and I'll oversee the job. Back to waterjet.....
  7. I hate to be the bringer of bad news but it appears we lost a good man and his plane yesterday. Just Google the crash for Calloway, KY. http://www.wreg.com/news/sns-ap-ky--smallplanecrash,0,1712171.story As a tribute to him and his just finished plane, here's some links.: http://www.airport-data.com/aircraft/photo/333539L.html http://wiki.velocityxl.com/index.php?title=Image:CIMG0131.jpg You can read his posts if you go to MichaelJ.
  8. Happy T-day to y'all as well. Drew we need to join forces and start a new company. Canardians Drew and Brew, brew pub. Build it and they will come. ..Welcome home. Things only get better from here.
  9. I did, lots of conflict. General consensus, "just another fix to a non-existent problem". Quote from Burt, "do you want to fly, or do you want to build"?
  10. From another thread: Waiter, so why did you move the oil heater from the nose to the rear thigh support? It would seem better for the toes where you had it?
  11. if you have a layup done on a scrap piece how do you look under it? Steve, do your build in the proper order. The seat back layup is much easier outside the fuse. : ))
  12. Naw, Scott took my idea. Seriously, I used to do this router stuff for fun on wood. It just came to me one day. I thought I'd just show it to you for fun.
  13. Personal touches are fun along the way. Nothing extreme here but a simple thing to do when frustration or money issues take over and you need a build break.
  14. To all Canardians and friends, Its with deepest sympathy I must say that the wife of Mike Skorija, aka "Dust", Lori Skorija and sister-in-law of Dave Clifford had passed away last evening. She had been battling cancer for over a year and a half. I had met her a few years ago and since I have never seen her not smile or have a kind word. Even up to her last days. We will miss her dearly. God be with her always, Greg Norman
  15. Neverquit

    cs 131

    Steve, P. 16-1 has it in the Schedule C box They're correct
  16. I wouldn't say, "big mistake". I do live in detroit. Anyway, I'll have to be careful with my bulletproof windows getting scratched from carelessness. Otherwise they probably won't break in the even of an off-field landing and one less thing to fix. While I have Mark's attention, I've read some guys (not to say who) have gone as far as putting the strake windows in nearly full area size? This seems to me a bit risky with lots of untested loss of strength in that area. Has anyone seen this or know its safe to do?
  17. Likewise. He certainly is a silver forked tounged devil. Thanks for reminding me Dennis... I have some turkey grease for you Mike. 43 deg. in MX??? Who says its always hot there. Wow!
  18. Yep, cone shaped bit does best. If you don't have a Dremel, sand or cut a 45 deg. bevel to a piece of scrap wood. I use a paint stirring stick. Get some sticky backed 36 grit and wrap it arount the wood. Works great.
  19. Jack does some real impressive work. I've heard of some real history behind the old purple flamed (RIP) E-Racer. A few progressive engine mods. I even heard a rumor of a Supercharged Chevy or Buick motor at one time? Jack, Any interest in giving airplane finish and paint lessons?
  20. I've been keeping my progress to myself lately jumping from one thing to another. Can't say I'm at a particular chapter. But I just wanted to post something to show that some mods are easy, fast, and add a personal touch. This is certainly not my idea. But here's how I did it: Cut out the shape of hole you want. This one is almost 6 -12. Make it so there's remaining glass and foam around it to retain some original strength. I did mine when the strakes were upside-down. I reinforced around the area with 2 extra UND tapes and one extra BID reaching from bulkhead to fuse then from bulkhead to bulkhead. Not real science but comforting for me. I installed the 1/4 inch Lexan similar to the rear canopy windows. I sanded the lexan edge about 3/4 deep both sides (be sure to make the Lexan 3/4 in. larger than the opening around the perimeter) and added 1 layer of UND. I installed them in the cutout and filled the voids with flox. The Lexan is not as thick as the 3/8 strake surface so the flox is feathered to the edges. You might get away with micro as well but I think the flox will be better to bond the outside glass to the inside. I didn't save the perimeter cutout like the plans canopy windows. Instead I added 1 inch then 2 inch BID tape around the perimeter and peel plied on the inside. I added weights to the windows to get a good close bond to the outside of the strake. This whole project took me about 5 hours to do both sides. The most difficult was digging out that foam for the bottom flange.
  21. Likewise. Yep! I put tape on the tiny washers a pair at a time while on the table edge-to-edge. While the canard was upside down with the elevator in place and ready, I draped the two washers over the elevator brackets (plates? L-shaped things) to dangle them in place on each side lined up with the holes.
  22. Hmmm... the guy's building a Harmon Rocket. And I thought he had a taste for an RV10. Hope that plane's coming along Dave. Pics would be nice.
  23. Kim, It appears the fuselage is too narrow. It's supposed to occupy two people side-by-side. Can you make an adjustment to your drawing and widen the fuselage to 42 inches to make it accurate?
×
×
  • Create New...

Important Information