Cozy2do Posted April 5, 2004 Posted April 5, 2004 Just a tip what I did for my screws so they would not turn. You can see from the attached pictures but basically extended slot all the way to edge and then tapped in brass rod that I picked up at local hardware store for 49 cents. John Quote
Dave Clifford Posted April 6, 2004 Posted April 6, 2004 Nice looking work John!! Quote Dave Clifford "The Metal Man" Musketeer Vise grip hands and Micrometer eyes!! Cozy MKIV Plans #656
Cozy2do Posted April 6, 2004 Author Posted April 6, 2004 Thanks Dave! I think they should stay put. I also washed the screws in acetone to get all the oils of them and the epoxy would adhere better. Quote
Daniel Dillon Posted January 6, 2005 Posted January 6, 2005 Fabulous photography.... Question, however (sinde I am not there yet)... what are these screws for, and are they then glassed over? Just a tip what I did for my screws so they would not turn. You can see from the attached pictures but basically extended slot all the way to edge and then tapped in brass rod that I picked up at local hardware store for 49 cents. John Quote
Wayne Hicks Posted January 6, 2005 Posted January 6, 2005 The screws are for holding the brackets for the rudder cable pulley, installed in Chapter 15. I like John's installation method. An offshoot of it might be to align two of the screws and extend the one rod across two screws. :-) Another solution is to use clickbonds. Quote Wayne Hicks Cozy IV Plans #678 http://www.ez.org/pages/waynehicks
Nathan Gifford Posted January 6, 2005 Posted January 6, 2005 ...tapped in brass rod that I picked up at local hardware store for 49 cents. John Looks great John and really simple. One question, is there a metallurgy problem between the screw and the brass? Quote Nathan Gifford Tickfaw, LA USA Cozy Mk IV Plans Set 1330 Better still --> Now at CH 9
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.