steve Posted January 20, 2010 Share Posted January 20, 2010 i cant find were is saids to fill in the gap between the strake and wing. can some one point plz Quote Steve M. Parkins Link to comment Share on other sites More sharing options...
Big Steve Posted January 20, 2010 Share Posted January 20, 2010 Steve: My plans are in the shop and it is to cold to go out there right now. But this is what I remember doing on my longeze. Put a piece of foam in the gap and glass over it. Then cut a really nice straite line and then take the wing off and glass the inside of the cut out foam eze as pie right??? Steve build on Quote Steve Harmon Lovin Life in Idaho Cozy IV Plans #1466 N232CZ http://websites.expercraft.com/bigsteve/ Working on Chapter 19,21 Link to comment Share on other sites More sharing options...
Phil Kriley Posted January 20, 2010 Share Posted January 20, 2010 Don't you just use duct tape? Quote Phil Kriley Cozy #1460 Chapter 13 - nose Right wing done - working on right winglet. Link to comment Share on other sites More sharing options...
Jack F. Posted January 20, 2010 Share Posted January 20, 2010 Quote Link to comment Share on other sites More sharing options...
steve Posted January 21, 2010 Author Share Posted January 21, 2010 i cant find were is saids to fill in the gap between the strake and wing. can some one point plz thats easy steve, look in the strake chapter,iir its step # 102 uni croxed Quote Steve M. Parkins Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.