jany77

hi guys i reded somewhere about cut the canard about4" short from original measurement my guestion is if its from overall dimensions or 4" from each side and why is that thank you

hi im wanted any prefab parts for varieze

what plane ? that might help if you looking for long ez or varieze layups i can make a copy and send it to you

http://www.donateyourplane.com/Q2.htm

try that link

hi guys i feel dumb ,because i see just my threads here but anyway

what aromatic amine is and what it does (is it danger,can it cost health problems is it smell bad),id like to use ez-poxy because of price and it say aromatic amine hardener,this amine is not in mgs but the price is somewhere else thank you

hi guys can somebody provide list of approved epoxy for building canards ,im personaly thinking using mgs 335 because cost less than 285 mgs and you dont have to pay special box 45$ or like another alternative maybe ez-poxy ,is cheap about 85$ a 1 1/2 gal the mgs 335 come out about 105$ any advice welcome thank you

thank you ,that makes life easyier,not spend some extra hours to build jig

thank you i figured it out after bulkheads are don ill make measurement and then ill find out how big curvate i need

i just put thermometer in hanger and watch for two weeks the lowest temp was68 and the highest was 76 so im makeing my box for epoxy wit dyson switch ,will take the temp between 90-110 and before starting each proces i bought smal ceramic heater for heating the foam fabric etc thank you guys for your responces

thanks but i was going over ch 4,5,6,7 thousands of time and there is none about jigs maybe im dumb but dont see any

hi guys im building long ez from original set of plans ,i was reading the plans months and did not find any simple jig for curvate,if somebody point it where exactly it is in plans ill appreciate it thank you

hi guys i have guestion about laying the fuselage sides ,the manual say lay on flat table but in next chapter is drawing which shows front and back side narrower than rest of bulkheads so im trying find out what to do with this i bought fuselage with couple of parts from guy next door hanger for free ill use just some parts but want make new fuselage and im not sure is after cure can the sides be bended to proper shape thanks for responses

no im looking for aluminium casting for the wheel i have the spring legs i just need the "fork for the wheel"

hi guys im looking for nosegear (fork for wheel )for long ez are they still somewhere available thank you

hi is there any mods on varieze if so what kind thanks

i think the cd from terf is 295$

hi guys can someone send a copy of all metal parts for long ez when im waiting for my plans i have some extra money and want buy some from aircraft spruce they have some available thanks

i was wondering if the cd from terf has all the proper sizes of the stuff like wings fuselage sides etc im new in this so i apologize for anything ill say here ,i downloaded the open ez stuff but there is only templates not what kind of material was used is that on this cd thanks

i have plans for long ez and want start building ,but was thinking about cozy mark iv just need some advice from builder ,also can help if ill see some project in process

hi guys im wanted some builder in monterey or near in california thanks

thanks for your reply guys what about the temperature here is all the time 62-72f and since i will build in hanger i dont have any heater to put in thanks

i forget mention i live in california where the temperature is always around 65-72 f im building in hangar

hi guys im new in this im starting building long eze from plans i get from one old guy and i did some search for epoxy resins ,which one do you using and where i can buy it thanks a lot i appreciate it

hi guys i have guestion about plans for long eze i have one set of plans never have been used or take out from box ,i want check if they are complete what everything is include plans, they have been sitting in my closed over 15 years,i just want be sure they can be still used for building