Jump to content

Recommended Posts

Posted

Is there a known drop in "available" RC servo for the roll trim to replace the original (obsolete) KPI-15ii servo?  I had the long half of the control horn snap off and cannot get the small center screw on the horn to come out.  I moved the control rod to the short side, but cannot get enough throw.  I assume I will break the horn completely and have to then cut the old servo out.  At that point, I would plan to replace it with a comparable, available servo and hardware.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information