Jump to content

Propeller-prop extension-6 inch-for Lyc O-230,360


D. deSosa

Recommended Posts

I have a 6" prop extension and crush plate made by Saber Mfg. for sale. This is the recommended heavier duty prop extension with a 7" diameter prop flange and crush plate for Lycoming O-320 and O-360 engines. It has the SAE-2 prop hole pattern (bolt hole center to opposite bolt hole center = 4.75"). It has been mounted but never flown. There are a few cosmetic scratches but otherwise it is in perfect condition. I'll take the first $275 offered. You can check current prices at http://www.sabermfg.com/

post-1270-141090172639_thumb.jpg

post-1270-141090172646_thumb.jpg

Link to comment
Share on other sites

I have a 6" prop extension and crush plate made by Saber Mfg. for sale. This is the recommended heavier duty prop extension with a 7" diameter prop flange and crush plate for Lycoming O-320 and O-360 engines. It has the SAE-2 prop hole pattern (bolt hole center to opposite bolt hole center = 4.75"). It has been mounted but never flown. There are a few cosmetic scratches but otherwise it is in perfect condition. I'll take the first $275 offered. You can check current prices at http://www.sabermfg.com/

what size are the engine flange bolt holes? 0-320 and 0-360 are different

Evolultion Eze RG -a two place side by side-200 Knots on 200 HP. A&P / pilot for over 30 years

Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information