Phil Kriley Posted June 15, 2009 Share Posted June 15, 2009 Chapter 19, step 6, bottom wing skin has you add a piece of UND that is 12 inches long and fits between the spar cap and the aileron, but not over the aileron. But where does it start/stop? I did the layup yesterday and centered it on the joint near the outboard wing bolt access hole, because that's what the drawing looked like, but that only put part of it actually between the aileron and the spar cap. Half of it is inboard of the "kink". I looked all over the forums and FAQ to no avail. Surely I'm not the only one who couldn't figure out the correct location...? Quote Phil Kriley Cozy #1460 Chapter 13 - nose Right wing done - working on right winglet. Link to comment Share on other sites More sharing options...
Wayne Hicks Posted June 15, 2009 Share Posted June 15, 2009 You did fine. I asked Nat about it long ago and he said just to center that layup on the kink. He added in these reinforcements -- top and bottom -- after hitting a sign post on landing and buckling the wing skins at the kink. Quote Wayne Hicks Cozy IV Plans #678 http://www.ez.org/pages/waynehicks Link to comment Share on other sites More sharing options...
TMann Posted June 15, 2009 Share Posted June 15, 2009 ...... wouldn't it be easier to just avoid the sign? Quote T Mann - Loooong-EZ/20B Infinity R/G Chpts 18 Velocity/RG N951TM Mann's Airplane Factory We add rocket's to everything! 4, 5, 6, 7, 8. 9, 10, 14, 19, 20 Done Link to comment Share on other sites More sharing options...
Phil Kriley Posted June 15, 2009 Author Share Posted June 15, 2009 ...... wouldn't it be easier to just avoid the sign? :D And thanks Wayne - I appreciate the explanation! Quote Phil Kriley Cozy #1460 Chapter 13 - nose Right wing done - working on right winglet. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.