Jump to content

spar jig material

Big Steve

Recommended Posts

I found a cheaper and easy way to build the spar jig. Instead of buying a 4X8 piece of chip board buy counter top materiel It comes in different widths and lengths. The big plus is all you have to do is rip it to the 12 1/2" the plans call out then lay out the angles and cut. You dont have to splice a piece in either. It will come out a lot straighter and it is cheaper too. Of course your cost could vary. STeve build on


Posted Image



Posted Image

Steve Harmon

Lovin Life in Idaho

Cozy IV Plans #1466 N232CZ


Working on Chapter 19,21

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...

Important Information