Jump to content

Finally!


dpaton

Recommended Posts

Hope you came out okay, and didnt take a beating!;)

Good luck!

Self confessed Wingnut.

Now think about it...wouldn't you rather LIVE your life, rather than watch someone else's, on Reality T.V.?

Get up off that couch!!! =)

 

Progress; Fuselage on all three, with outside and inside nearly complete. 8 inch extended nose. FHC done. Canard finished. ERacer wings done with blended winglets. IO540 starting rebuild. Mounting Spar. Starting strake ribs.

Link to comment
Share on other sites

Thanks Edge. We took a beating, but we're still getting some money out of the house at closing. Not as much as we'd hoped, or as we would in a normal market, but it's enough for now.

This is not a sig. This is a duck. Quack.

Link to comment
Share on other sites

No worries Rick...I haven't done anything plane related in months, aside from dream. Every penny has gone to the new down payment, and every moment to fixing up the old place to sell. Hopefully the new house will be more plane friendly, as I've got a set of Cozy plans on my list for the holidays this year.

 

As for flying...I'm always up for a ride. That reminds me, did you ever get the back seat intercom issue figured out?

This is not a sig. This is a duck. Quack.

Link to comment
Share on other sites

Yeah

 

The radio is configured for matching headsets. We mismatched when you had the Clarks and I had the Lightspeed. There is a pin and resistor arrangment.

 

In the meantime I bought an intercom setup that allows VOX, stereo, ANR and cell phone hooks ups. Works well.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information