JakeC Posted July 4, 2003 Posted July 4, 2003 John, I was wondering if you had these dimensions off the top of your head: Firewall to back of engine Length of engine w / PSRU attached Not in a big hurry, just trying to get my mind around things. Thanks. Jake Quote www.homebuiltairplanes.com
John Slade Posted July 7, 2003 Posted July 7, 2003 The prop is at the same fuselage station as it is on a Lycoming powered Cozy. Its all in my web site under chapter 23, Jake. Diagrams and everything. Quote I can be reached on the "other" forum http://canardaviationforum.dmt.net
JakeC Posted July 7, 2003 Author Posted July 7, 2003 Thanks John, I don't know how I missed it. Jake Quote www.homebuiltairplanes.com
JakeC Posted July 7, 2003 Author Posted July 7, 2003 On your site you mention that the CG of your engine is at 20.7 inches from the firewall. Where is the CG of the 13b, is it pretty much in the middle of the engine. I imagine with the PSRU it is somewhere aft of the middle. Were your calculations of the CG of the engine with all of the accessories and plumbing or just bare engine. Thanks in advance. Jake Quote www.homebuiltairplanes.com
John Slade Posted July 7, 2003 Posted July 7, 2003 >Where is the CG of the 13b, is it pretty much in the middle of the engine. Yes. >CG of the engine with all of the accessories and plumbing or just bare engine. Bare engine + psru Quote I can be reached on the "other" forum http://canardaviationforum.dmt.net
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.