Gecko

Jon,

Just curious if you still planning to update the Rev 5 drawings? You replied last fall that was the goal of a winter project.

Thanks, Gecko

Thanks, Jon. I'm still on the bubble about building. Please confirm that Rev 5 (Mar 2006) is the most current OpenEZ drawings.

Thanks,

Gecko

Thanks, Kent. I had seen John's post concerning the erroneous dimensions (I've done it while woodworking). I'll copy John's text into the PDF and annotate my drawings A/R. If I build I want to make sure it's correct the first time. I hope you can understand why I'm concerned about the lack of the opposing "witness marks".

BTY - Do you know how to remove images from the threads? The usual "delete", "right click", etc., didn't work and made it worse.

Thanks again, Gecko

I apologize for the duplicate images. When trying to remove the redundant image it replicated (reminds me Mr Smith of The Matrix).

On 6/16/2019 at 9:04 AM, Kent Ashton said:

Which sheets and what format (.tif or .pdf)?  I looked as a few of the PDF drawings and they have the dimensions shown in the bottom corner.  There has been discussion about how to print them out to correct scale but I've never had to do that--had some original plans.

As I recall, the TERF CD is copyrighted and should not be copied from.  So are the EZ plans but Rutan has informally waived copyright.

Both the PDF & TIFF drawings are missing part or all of the corner reference marks. Sheet A1 has the marks in the upper-left and lower-right (green circles). Sheet A3 are missing the marks in the upper-left and lower-right (red circles).

Is the thought (provided the same scaling is used) if Sheet A1 prints accurately then the remaining sheets will be accurate? 

I was told about Burt's informal waiver. I would actually purchase a TERF CD set if I were to build.

Thanks, Gecko

On 1/8/2010 at 8:27 PM, raiki said:

http://www.canardzone.com/forum/attachment.php?attachmentid=1706&d=1211433000

Hi, all. I'm considering building an EZ and a few years ago I downloaded the file "Open-EZDrawingsRev5.ZIP". While examining the drawings today I noticed that several of the sheets are missing scale verification references (the X-Y reference opposite the dimensioned X-Y). I don't know if there is an updated file and the link above (I know it's from 2010) is no longer valid. I also see that Rev 5 has dimensional errors.

Also, are the TERF CDs still valid?

Thanks,

Gecko