LongEZ-Dave
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Articles
CSA Articles
CSA Issues
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by LongEZ-Dave
-
-
My long has the standard panel, the Open-EZ I'm building has the 7° slant your referring to. until I get the fuse tubbed up and am able to sit in it and see for myself then I guess I'll see if it's worth the trouble.
Those I've talked to say it makes the panel present a little better, if you can make a mock up and try it out and see what suits you best, I really don't think the slant vs. the standard would really make a big difference once your flying, some say it does...
-
John,
It's a RIP of the original, and I am by no means a technical writer...
I'll send you a copy of what I have so far if you'd like, though it is not updated by CP-30 and above yet.
It was basically for my own use (and I must have been extremely bored), tailored for my airplane and I thought I'd put it out there for others to use...
Dave
-
Ummm...
it's already done in MS word...
Fixin' to be released
-
Bob,
I'm at Southeast Texas Regional near Beaumont, message me and I'll give you my contact info.
Currently building two longs...
Dave
-
I found the project in the EZ-Squadron classifieds, and promptly set the deal in
motion, I'll post pics soon...
Dave
-
Hi everyone,
I finally found a suitable long-ez project, though about 20 hrs away from me, I go to pick it and the 0320 thats included along with all the included goodies in 3-4 weeks.
I'm about to jump outta my skin waitin'... what the heck, I've waited 15-20 years, whats another month?
Just thought I'd chime in and say HI!
Take Care!
Dave
roncz canard cad drawing
in General Construction
Posted
<Step in here Marc or anyone, if I'm out in left field>
If you mean using the GU spar cap on a roncz canard then NO, the lay-up schedule and the materials are different.
The roncz uses 3" uni tape like the wing spar caps, while the GU uses the standard uni off a 38" roll and is layed up using a folding process during the lay-up.
BTW the GU templates are already in the A1-14 Drawings for the Open-EZ...