LongEZ-Dave

<Step in here Marc or anyone, if I'm out in left field> If you mean using the GU spar cap on a roncz canard then NO, the lay-up schedule and the materials are different. The roncz uses 3" uni tape like the wing spar caps, while the GU uses the standard uni off a 38" roll and is layed up using a folding process during the lay-up. BTW the GU templates are already in the A1-14 Drawings for the Open-EZ...

My long has the standard panel, the Open-EZ I'm building has the 7° slant your referring to. until I get the fuse tubbed up and am able to sit in it and see for myself then I guess I'll see if it's worth the trouble. Those I've talked to say it makes the panel present a little better, if you can make a mock up and try it out and see what suits you best, I really don't think the slant vs. the standard would really make a big difference once your flying, some say it does...

John, It's a RIP of the original, and I am by no means a technical writer... I'll send you a copy of what I have so far if you'd like, though it is not updated by CP-30 and above yet. It was basically for my own use (and I must have been extremely bored), tailored for my airplane and I thought I'd put it out there for others to use... Dave

Ummm... it's already done in MS word... Fixin' to be released

Bob, I'm at Southeast Texas Regional near Beaumont, message me and I'll give you my contact info. Currently building two longs... Dave

I found the project in the EZ-Squadron classifieds, and promptly set the deal in motion, I'll post pics soon... Dave

Hi everyone, I finally found a suitable long-ez project, though about 20 hrs away from me, I go to pick it and the 0320 thats included along with all the included goodies in 3-4 weeks. I'm about to jump outta my skin waitin'... what the heck, I've waited 15-20 years, whats another month? Just thought I'd chime in and say HI! Take Care! Dave