Jump to content

Q2/200 UL260 engine mount CAD

Recommended Posts

Hi Folks

Here is basic model of an engine mount for a UL260. I have made a spaceframe type that takes loads nearer the edge of the firewall. Some small webs inside the firewall will be added. The lower ones can transfer engine loads directly to the canard. Perhaps a few gussets are required in the engine mount.

The UL installed weight is  slightly lower than the dry weight of the Revmaster 2300. It also produces more peak power, and equals the Revmaster 2300 peak power at just 2800 rpm. It is about double the price of the R2300. It does offer fuel injection and FADEC. There is still a huge saving in using the Revmaster.





  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...

Important Information