Kurt Soendergaard Posted December 30, 2020 Share Posted December 30, 2020 Does anybody here know where the plans, the rights to the plans and the moulds are to the sq 2000 today? I have tried to track them, but end up in a circle. Best regards Kurt Quote Link to comment Share on other sites More sharing options...
lelievre12 Posted February 25, 2021 Share Posted February 25, 2021 The SQ2000 factory fuselage was not an advanced mould. It was simply a 'tube' in two halves with no door cutouts, windows, strakes or any other detailing. All this had to be added manually which makes the benefit of 'factory' moulds pretty small. It would be easier and better to CAD up the design, add the window/door/strake detailing and then CAM cut the mould in foam. You can see more at SQ2000.us See these photos: finalresult-flattened.mov Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.