kdalons Posted November 28, 2007 Share Posted November 28, 2007 Hello, I recently purchased a Varieze (O-200) without wheel pants. I have purchased wheel pants from Lightspeed.com - which I will be installing shortly. My Varieze still has the P-51 inlet so I can't use the gear leg fairings that Lightspeed sells, so I am interested in making my own. I am a CSA subscriber, but only have the 2007 issues right now. Any good articles out there describing building gear leg fairings or are there some old CSA back issues I could buy that cover it? Thanks in advance, Kevin Alons N80RL (Varieze) Quote Link to comment Share on other sites More sharing options...
Wayne Hicks Posted November 29, 2007 Share Posted November 29, 2007 Although this method is accomplished with the gear out of the plane, you can accomplish it by putting a piece of plywood vertically in front of your gear leg. Do all the carving using the plywood as the reference instead of the table. Quote Wayne Hicks Cozy IV Plans #678 http://www.ez.org/pages/waynehicks Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.