Jump to content

Alternator and Dynamo

Norm M

Recommended Posts

Time to start cleaning up the shop, and selling some of the parts I decided not to use.


These two items are the backbone of the electrical system I had planned for the 13B. The 40Amp ND alternator is the same unit that B&C starts with for their L40. The 20 Amp PM Dynamo is similar to the SD8, and is widely promoted for use on the Corvair conversions and such. It's claim to fame is the ability to generate voltage without needing a battery.


Both units are new. I decided to go with the B&C units in a moment of weakness for being ready tobolt something on rather than build it from scratch and feeling flush with cash. The AeroElectric list and site contains lots of discussions on how to incorporate these items into a robust, failure tolerant system.


Plans are to generate enough cash to buy another set of plans... This time something aluminum!



Norm Muzzy

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...

Important Information