Search the Community
Showing results for tags 'balance'.
Found 1 result
I am installing an autopilot trim servo to my Long EZ. I mounted the control servo to the bottom of the canard. I have mounted a 0.50" dia. X 1.00" lg. aluminum tube spacer and an AN3 bolt and nut to the left CS12 bracket. The spacer, bolt and nut connects to the elevator trim servo control rod. I believe these items need to be included in the weight and balance of the elevator. I have weighed the elevator with the spacer, bolt, and nut. The weight is 3 lb. 10 oz. which is under the 3 lb. 14 oz. max weight but the balance is 9 degrees which is outside the 12-22 degree balance limit. I can move the balance to 15 degrees by adding 1.8 oz. of lead weight to the outboard CS10 weight OR remove around 3 oz. of weight from the inboard CS11 weight. I am not sure what the corrective solution should be. Has anyone addressed this issue on your plane? I Would appreciate your input. Jerry324