-
Posts
47 -
Joined
-
Last visited
-
Days Won
18
Content Type
Profiles
Articles
CSA Articles
CSA Issues
Forums
Blogs
Events
Gallery
Downloads
Store
Everything posted by Eugen
-
Sorry, but currently no updates available. But still in work.......
-
For sure it was min. Divinycerll H35 or larger. https://aerobase.weebly.com/q1-bill-of-material---source--spec.html
-
Send you a pm.
-
I did my build based on the plans, please follow the link where the spar and the main skin is indicated. My canard is the standard GU profile. http://www.quickheads.com/index.php?option=com_content&view=category&layout=blog&id=29&Itemid=122&limitstart=80 In the spar section I placed additional some layers of carbon were added to increase stiffness. Q1 builders from South America have reported in the Q1 newsletters with that carbon layers to improve the launch performance from grass slopes, with the big tire setup.
-
All information you need to build that aircraft you will find in the Q-Package, in the build plans and in the QAC News Letters. Exact is relative here, however, especially since there are not so many available or active on the Internet who have built a Q1 …….
-
-
SOLD: Quickie Q2 Kit and Plans - not started
Eugen replied to Jon Matcho's topic in For Sale (or for Free)
@Jon, sent you a pm. -
quickie engine problem solved
Eugen replied to towplane's topic in Builder Progress Reports & Motivation
Did anyone in touch with towplane? I send him some notes and emails but not response so far. thanks. -
quickie engine problem solved
Eugen replied to towplane's topic in Builder Progress Reports & Motivation
@towplane , I send you a message. -
quickie engine problem solved
Eugen replied to towplane's topic in Builder Progress Reports & Motivation
Yes its a Q2 and comes from Autodesk fusion360. im on my way to build the q1 wing after fuselage is done so far. Would like to share with you details about the engine. I had some questions….. -
Sorry, I do not share the 3D models.
-
Watch that…….easy and cheap….. https://www.homebuiltairplanes.com/forums/threads/high-intensity-led-strobes-acl-whats-available.34848/page-2
-
So far the bottom wing is done and ready to place a frame and switch it on the top side. They was place two peel ply sheet so the top do not get in touch with each area, but the bottom ply fit.
-
quickie engine problem solved
Eugen replied to towplane's topic in Builder Progress Reports & Motivation
Hello Chris, nice engine! My engine is on the way 🙂 which prop you did on that engine ? Dia? Pitch? -
Here we go with main wing ailerons slot with 1 bid and peelply on the top. To reduce the twist there was placed some weight to press it on the flat table.
-
So far the Canard is going truth the cnc diy foam cutting machine, please find a picture below. After that the wing will be the next step to cut. The cnc diy foam cutting machine based on that source: RcKeith and that software: https://www.devcad.com/eng/devcncfoam.asp The machine runs very well and bring out a good quality of cuttet parts. How to build part#1 Best regrads Eugen
-
Hello together, so far the Q1 fuselage is done with the outside glass. The next steps will be to produce the Main Wing and canards. The foam is already delivered by the supplier.
-
I had the same issue last year and after some PM to his account I got the access to download the information from canard zone.com You should try and try it again until you get some response.
-
In Europe we get it from R&G, please find the link below R&G peel ply but in the other cases I use Compoflex peel ply Compoflex 150 SB for vacuum infusion is much better.
-
-
-
-
So far the Bulkheads 153.7 and AFT Canopy are in the vacuum bag, please find below the picture. Additional to that you will find picture from FS89 after the unpacking.