Jump to content

sixfivelrp

Members
 View Profile  See their activity

  • Posts

    25

  • Joined

  • Last visited

  • Days Won

    5

 Content Type 

Everything posted by sixfivelrp

  1. sixfivelrp
    What’s the worst that could happen? You have two aircraft. 😜
  2. sixfivelrp
    If you are trying to make parts from the work instructions just use them as a print. The open eze package has everything needed to build a fine aircraft.
  3. sixfivelrp
    Boomerang! Saw it up close. That is the machine.
  4. sixfivelrp
    Freight is only worth it if you buy all the materials for the build at once. Ups or fedex should be cheaper for ordering a chapter or two at a time. Order the wood in 8 foot sections and scarf the longerons to get the length you need.
  5. sixfivelrp

    Smooth Operator

    sixfivelrp replied to Royal's topic in Open-EZ

    A major consideration for building one of these aircraft is the performance vs cost. Prefabricated parts will be expensive. if I’m spending six figures I’d rather have two aircraft to show for it.
  6. sixfivelrp
    Type in H 250 foam availability in the search for the substitution.
  7. sixfivelrp
    Thanks Marc, doesn’t get any easier than that. On inside cosmetics, it still has to be good enough so one doesn’t stay up nights obsessing about it. Lol. Peel ply is my friend.
  8. sixfivelrp
    Here is my dilemma, I had a small slip with the multitool trimming the canard cutout on the fuselage. My issue is if i do the standard repair of one inch per layer, i will end up grinding way out into the good stuff, as this is in the corner where the f22 reinforcement layup is. See pics. Second opinions are appreciated.
  9. sixfivelrp
    I do test stand wiring for a living so I second the idea of removing the old wiring and starting fresh. It will probably take No more time and you will have the piece of mind of a robust electrical system. Not to mention will know every aspect of it while you create the schematic.
  10. sixfivelrp
    Keep checking the lodge, there have been cancelations.
  11. sixfivelrp
    CP 25, page 5. For the spacing. CPs are just as important as the plans. I read and reread prior to every chapter build.
  12. sixfivelrp

    H-250 Foam

    sixfivelrp replied to TDubs74's topic in Open-EZ

    See CP 26 page 3 for confidence in the alternate material and save hassle and money.
  13. sixfivelrp
    You actually have more control with the vibratory tool then the razor blade. Since it does all the work very little pressure is required. You can use your other hand as a guide to control the depth. As an added bonus, no possibility of slicing the dickens out of yourself.
  14. sixfivelrp
    Can’t imagine building without this tool!
  15. sixfivelrp
    On those gear extrusions add press in steel bushings. McMaster Carr # 8491A725. Also i have a cad file of the ones we made if you need it.
  16. sixfivelrp
    Correct me if I am wrong, but micro slurry foam to glass interfaces only, and not glass to glass.
  17. sixfivelrp
    You could add a swingarm mechanism to the existing pedal assembly, or if your ambitious fab some new delux ones.
  18. sixfivelrp
    Heard it as it happened on the tower freq. Good idea to install the warning system. High excitement coming into Oshkosh, easy to forget something.
  19. sixfivelrp
    So let me get this straight! They are going to wait till there is enough interest. That's not how it works. Both you and I will just look for alternatives, as the build must go on without delay. If it was me I would stay up nights to cast a half dozen or so struts. We are building both so I have a raw LEZ NG strut just in case you want some dimensions prior to deciding which route you you will take.
  20. sixfivelrp
    The tick marks aren’t in all four corners. All you need is x, y. I about lost my mind over it. Everything so far has turned out beautifully, much better then expected. I printed the templates on a plotter, they were pretty close, however some small scale adjustments might be necessary. Make sure to read all the CP’s for the deviations, changes.
  21. sixfivelrp
    I am currently building to these plans. I was pleasantly surprised at the fit of my bulkheads and sides. I spent months obsessing over the accuracy. I too compared the available bl and wl measurements. We also have the plans for the Cozy 4, and in comparing the templates for the winglets they Match well. Finishing chapter 7 on the tandem.
  22. sixfivelrp
    Went for the first time in 2018, there was a bunch building talk along with checking out the goods. Hopefully another local Varieze will join this year.
  23. sixfivelrp
    I figure I am only going build once so why not. Before I know better I will have two fuselages. Seriously I have very good local support from a Vari/Cozy3 builder who already has saved me much pain. The second time you do something it is much quicker. During my lunch breaks all my metal fab is done in a full fledged machine shop. There is a lot of building going on with our local EAA chapter, turns into more of a group project unless your a loner.
  24. sixfivelrp
    Building a Long from the open eze info. On chapter 6. Also building A Cozy 4.
  25. sixfivelrp
    Make sure you post some pictures of your progress on this rare find!

The Canard Zone

×
×
  • Create New...

Important Information

  I accept