Jump to content

johnjamis

Members
  • Posts

    3
  • Joined

  • Last visited

Project/Build Information

  • Plane (Other/Details)
    long ez, o235l2c

johnjamis's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. Toolbox, I live just south of Florence KY and have a Long EZ I may sell to the right person. It was first flown in 1984 and has 525 airframe hours and 998 hours on the Lycoming O235L2C. It has an IFR panel with flight director. It has been in storage since 1992 and will need some work before its next flight. If you are interested email; jonjamis at fuse dot net Thanks, John
  2. I used flox to build up a flat mounting surface and did not sand a flat on the gear strut. Also, be sure you have the axle positioned correctly. The plans are not real clear on vertical postioning. This sets your 3-point takeoff pitch angle. You may have to cut a little off the gear to get the correct axle position. Also, watch for too much camber because this will cause premature tire wear on the inner edges. You may have to shim the axle away from the gear leg to get enough clearance between the brake disc, heat shield, and gear strut.
×
×
  • Create New...

Important Information