EZ AHAB

25.0 hours in a B-1B:D Well, maybe it isn't really a canard but it does have canards...sortof:)

Phil, Maybe I can shed some light on this issue. The Long-EZ has a kink both in the wing planform and in the vertical position of the trailing edge. The kink moves the trailing edge forward about 5/8" and up about 1". This kink was to allow the VariEze cowlings to fit on the Long-EZ. When Nat modified the wing for the Cozy IV, he eliminated the kink in the planform but not in the vertical. He moved the inboard root template 4" further inboard and stretched it in length to make the trailing edge stay at the same angle as the rest of the wing. He did not change the vertical position of the template or adjust the trailing edge at all in the vertical so it still has that part of the kink in it. -Steve

Probably not since that is a compound curved thing. Also, there doesn't really seem to be a standard to follow. If anyone has an idea they'd like me to cut, I'll give it a try, time permitting. I've been considering doing some testing and helping a friend build blended winglets on his airplane but that will be awhile before anything comes of that.

I've finished my training for the summer and I've almost got my machine back together here in the new place in Vegas. I'm going to go ahead and start accepting orders again since I've been getting lots of folks trying to send me orders anyway. I've had to adjust my prices some due to huge increases in the price of foam in the last few months. These price increases have affected all foam suppliers including Wicks and Aircraft Spruce so it's not just me. -Steve

I wasn't refferring to just the nose. I meant the whole airplane including the rounded fuse but especially the wings, winglets, and canard

It will be a shame to paint those cowlings, the carbon looks so nice! You'd better believe Tony's Berkut WILL be symetrical. I've seen his and Dale's work first hand it is truly beautiful.

Looks like I'll be spending the summer in Alamogordo for some training. Unfortunately, I won't be doing any building while I'm there.

Looks like my wife and I might be in the Houston area Sat evening/Sun morning. I've got some cores to deliver and then we're going on a cruise out of Galveston on Sun. Keep me in the loop as to potential activities.

Still taking a few more orders on a conditional basis. See my website for details. If you are the Airbus pilot from Germany that called me on the 20th of Jan, please call or email me if you still want to order.

I just hauled a 4' x 9' trailer load of that stuff to the trash last night myself. Got to get the garage cleaned up now that the house is on the market. If anyone needs small pieces of this stuff in the future, I'll be happy to give away the stuff in my scrap pile (I still have scrap pile, it is just much smaller now:cool: ).

I thought about doing something like this. It would cost too much to mail it to anyone first but I could probably find someone to ship for me that is here in the Abilene area. I may try to cut a few extra to have in stock but the limiting factor is my available time. After working on the house to get it ready to sell, packing, house hunting trips, etc, not to mention my day job; there's not much of it left.

Just wanted to point out that the order deadline is the end of Jan 2009, not the 9th of Jan as could be misconstrued from my earlier post.

Thanks gals, you two have been a tremendous help already I suppose you could take a road trip and help me pack That invitation is open to the rest of you as well!

I've recently gotten orders to move again. Gotta love active duty; I don't think I've lived in the same place for more than 3.5 years since 1990. Anyway, I'm going to take orders through Jan 09 or until I have all I can handle before the move. After that all orders will be on hold. I plan on starting back up again when I get settled in but, due to training requirements, moving, setup, etc it will probably be Aug-Sept 09 at the earliest. See my website for more details or to make an order.

My thoughts exactly. This isn't meant to provide structure, just something to mold the leading edges with. You might as well intentionally disolve the foam out after you get the glass on to save weight. Well, that depends on whether you've built your strakes already or not. If you have, they will have to be adjusted for proper fit and you will have this problem whether you get fiberglass parts or foam parts except that the foam ones will probably be much easier to adjust. If you haven't yet built your strakes, you just build them to match the leading edges. Yes, I suppose you could probably use it for either the Cozy or LEZ although, I make no claims to have done any testing whatsoever. The Girrrls and I discussed providing parts to make their Cozy IV strake leading edge design available while we were at Osh. It's something we just haven't gotten around to yet and had pretty much forgotten about it until I saw your post today. It's just an idea at this point but I think this is how Randi and Chrissi built their Cozy.