Jump to content

Cozy1200

Members
  • Posts

    457
  • Joined

  • Last visited

Everything posted by Cozy1200

  1. Cozy1200

    Berkut Kit

    Nice work Tony. Please forgive my memory, but I thought you were selling the project?
  2. Cozy1200

    Wood Parts

    I used Australian Hoop Pine as it is an approved substitute for Spruce. It was available locally and cost about $30. It was marginally heavier, something like a few percent.
  3. welcome to the club. My cozy is a long way from flying, but it's still fun to see. I'm on the other side of the state in Portland. You're welcome to come anytime. I just received supplies for CH9.
  4. Not that I endorse or approve such a thing, but I guess it was just a matter of time until that happened.
  5. Concidering the cost and availabilty of used aircraft engines in oz, that could be a really good price. But then again, the exchange rate has been good in recent months and it would also be a good time to buy one from the us.
  6. FYI. I tried to buy from them, but with the new laws and taxes, it didn't work out. Had I been a Canadian, they seem like it was more feasible. Definitely give them a call.
  7. Brunch Quiche Lorraine or Frittata Orange/Almond Biscotti (made with Grand Marnier) Dense (thick) Hot Chocolate Fruit/Yogurt Parfaits Afternoon nibbles Pickle Wraps Tray with Deer meat, Sharp Cheddar Cheese, Another cheese like blue, Crackers Baked Brie Dips: 1. (Amy) Artichoke Olive crustini 2. (Anne) Deviled Egg Dip 3. (Mom) Spinach artichoke dip Dippers: 1. Baguette 2. Carrots, Celery 3. Taco Chips Candied Pecans Warm Christmas Punch Believe it or not, Amy wanted to make it a simple cooking day, as we're eating supper with some friends. Merry Christmas you all.
  8. After the Hurricane Katrina, many states adopted new building codes requiring a single header to go completely over both doors clear to the wall. The single header may to be put in anyways. So structurally one door and two doesn't matter. If this is the case, building the center column to be removed is very doable. Maybe not easy done, but you'll be doing it rarely. If two single doors are required, then simple get wider doors. They're available in about any width and height you want. Heights are avialable in 3" increments and widths in about anything you need, but normally 1 or 2 foot increments. I don't know you'd need to get a cozy on it's wheels, but on an incline should be doable.
  9. Spodman needs to get some credit in there somewhere... After-all he supplied the grog.
  10. It's my first Thanksgiving in the country for 3 years. For some reason last year they still wanted me to work on Thanksgiving day. Being thankful for what I have. Life, Love. Now I just need to get full employment.
  11. Bob, you are truly doing spectacular work. I can't wait to see some parts pulled from the mold. I've been following the thread, but don't recall. What type of glass, epoxy, internal structure system are you using?
  12. chip brushes from Harbour Freight. http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=4181 They normally have them on sale for $6.99. I use them probably 6 times until the get too stiff to be useful... or I forget to clean them. I only use white vinegar to clean epoxy related stuff. I keep a small plastic mixing tub (with lid) about half full with vinegar. When done with a brush, I jab the bristles a dozen or so times in the bottom to help brake up the epoxy covered bristles. Then let them soak while I clean up the rest of the tools. Then I wrap the brush in a paper towel to dry for a couple days. I probably have 4-5 brushes in various uses at any given time. A couple drying, a couple ready to be used, a couple hard as rocks because I forgot to clean them. whoops. I use lots of Z fold bathroom style paper towel. Years ago Mom picked up a ton of that stuff from a business that was going bankrupt.
  13. I don't recall ever having air in a layup that showed up at black spots. Possible contamination?
  14. I bet you used a router on your bulkheads too! I know a lot of people say it's too much work, but I never said that the only way. I use the tools and methods that I'm comfortable with and have used in the past.
  15. Greg, That's some serious attention to detail. Very Nice. Inspired by Scott's Cozy?
  16. Ch4-9 was my first order Check with AirHeart for MGS, I believe they are the North American distributor. Don't order cloth with the chapter kits. They will cut that amount for each chapter, order the amount you want and remove it from the individual chapters. double check the front 3/4" seatback foam, ASS had twice as much as is needed. They may have it changed by now in their kits.
  17. Thank you. In a former life I was a portrait and wedding photographer. About the only thing I take pictures of anymore are airplanes. And most of those are shot with a $500 point and shoot. I still enjoy it, but I never do anything with them besides post them on the web. Oh if I only had half the money I spent on a camera equipment, I could probably buy a cozy. sigh. glad you like the photos.
  18. I had a blast at RR this year. What a change in my 3-year hiatus. The first three years went kind of like "oh you're Rick Maddy. There's Marc Zeitlin. Wow there's the StaggerEZ." Now, more than once when meeting someone the common response was “you're the guy that went to Australia!" Yep, that is me. It is like a big family reunion, only better. There is not that annoying cousin that nobody likes! Old Friends, new friends and lots of canard talk caused the day to go by way too fast. I am so looking forward to next year. Amy & I started to fly down in a rented spamcan, but had to turn back to due to weather. Started out at 1500 ceiling, but soon drop down to 1,000 with around 7sm visibility. Ok, let’s see what's ahead. When that bright spot ahead of us turned into 500-foot ceilings and 1 mile, there was no decision to be made. It should have only been a 90-minute flight, but we turned around after 25 minutes. Our good mate Bruce was in from OZ so we were not going to miss this year. The plane was unloaded back into the car and off we go for the 5+ hour drive. It was so worth it. Here are a few of the pics that I took this year. Nothing mind-blowing, but there are a couple good pictures in the group. http://www.cozy1200.com/geeklog/mediagallery/album.php?aid=18
  19. I'm so excited and I just can't hide it I'm about to lose control and I think I like it... Amy & I'll be flying a C172 down. Camping right along side Lifessamsara (Bruce) or maybe the other way around. Attention everyone, it is true that Australians drink lots of Beer. This year we'll have a token Australian and a temporary convert. So I guess I'm saying that somebody better have some beer. Glad to hear you made it over Bruce. When are you arrive at RR? Did you get a chance to get that hat?
  20. Very nice work Kent. Where does the air for cooling the cylinder heads come from?
  21. Very cool Mike. I learned of MAF from an magazine article probably 5 years ago. They do really neat work. Amy & I send them a little money a couple times a year.
  22. Isn't that stuff radioactive or something like that?
  23. Unemployed and it's not financing the Cozy too well at the moment. 5 months ago, I was responsible for all technical and training aspects for the worlds largest manufacture of submersible pumps and motors throughout Australia and New Zealand. Anyone need a motor expert? Actually I just interviewed this past week. Next round of interviews is the week after next. Somebody hold your breath, I need some cozy money.
×
×
  • Create New...

Important Information