Countach74 Posted March 24, 2021 Share Posted March 24, 2021 Nice Work!!! Keep us up to date on your progress. Have you got the plans for the Super Quickie mods? Quote Link to comment Share on other sites More sharing options...
Countach74 Posted March 24, 2021 Share Posted March 24, 2021 http://jdfinley.com/quickie-aircraft-documents/ Quote Link to comment Share on other sites More sharing options...
Eugen Posted March 24, 2021 Author Share Posted March 24, 2021 5 hours ago, Countach74 said: Nice Work!!! Keep us up to date on your progress. Have you got the plans for the Super Quickie mods? The paperwork from Brock/Jinx I already have and placed on my website, thanks for the hint. Below the picture after 10h fix in the vacuum bag. Q1 Superquickie Quote Homebuild Projects ASSO X-RAY 600kg version - still in progress QUICKIE Q1- still in progress WWW: https://aerobase.weebly.com PICTURE: https://www.flickr.com/photos/aerobase/ Link to comment Share on other sites More sharing options...
Eugen Posted March 25, 2021 Author Share Posted March 25, 2021 So far the Bulkheads 153.7 and AFT Canopy are in the vacuum bag, please find below the picture. Additional to that you will find picture from FS89 after the unpacking. Quote Homebuild Projects ASSO X-RAY 600kg version - still in progress QUICKIE Q1- still in progress WWW: https://aerobase.weebly.com PICTURE: https://www.flickr.com/photos/aerobase/ Link to comment Share on other sites More sharing options...
Eugen Posted April 26, 2021 Author Share Posted April 26, 2021 Here we go, the fuselage side #2 is in the bag 😀 2 Quote Homebuild Projects ASSO X-RAY 600kg version - still in progress QUICKIE Q1- still in progress WWW: https://aerobase.weebly.com PICTURE: https://www.flickr.com/photos/aerobase/ Link to comment Share on other sites More sharing options...
Eugen Posted May 15, 2021 Author Share Posted May 15, 2021 The bottom is in the bag for the next 24h 🙂 2 Quote Homebuild Projects ASSO X-RAY 600kg version - still in progress QUICKIE Q1- still in progress WWW: https://aerobase.weebly.com PICTURE: https://www.flickr.com/photos/aerobase/ Link to comment Share on other sites More sharing options...
Eugen Posted June 6, 2021 Author Share Posted June 6, 2021 The fuselage is ready to sand after today the bulkhead 110 is fixed on his place. 1 Quote Homebuild Projects ASSO X-RAY 600kg version - still in progress QUICKIE Q1- still in progress WWW: https://aerobase.weebly.com PICTURE: https://www.flickr.com/photos/aerobase/ Link to comment Share on other sites More sharing options...
Countach74 Posted June 7, 2021 Share Posted June 7, 2021 Nice Progress! Where can one get the peel ply with lines in it? Quote Link to comment Share on other sites More sharing options...
Eugen Posted June 7, 2021 Author Share Posted June 7, 2021 19 hours ago, Countach74 said: Nice Progress! Where can one get the peel ply with lines in it? In Europe we get it from R&G, please find the link below R&G peel ply but in the other cases I use Compoflex peel ply Compoflex 150 SB for vacuum infusion is much better. 1 Quote Homebuild Projects ASSO X-RAY 600kg version - still in progress QUICKIE Q1- still in progress WWW: https://aerobase.weebly.com PICTURE: https://www.flickr.com/photos/aerobase/ Link to comment Share on other sites More sharing options...
Eugen Posted August 3, 2021 Author Share Posted August 3, 2021 Hello together, so far the Q1 fuselage is done with the outside glass. The next steps will be to produce the Main Wing and canards. The foam is already delivered by the supplier. 1 Quote Homebuild Projects ASSO X-RAY 600kg version - still in progress QUICKIE Q1- still in progress WWW: https://aerobase.weebly.com PICTURE: https://www.flickr.com/photos/aerobase/ Link to comment Share on other sites More sharing options...
Eugen Posted October 22, 2021 Author Share Posted October 22, 2021 So far the Canard is going truth the cnc diy foam cutting machine, please find a picture below. After that the wing will be the next step to cut. The cnc diy foam cutting machine based on that source: RcKeith and that software: https://www.devcad.com/eng/devcncfoam.asp The machine runs very well and bring out a good quality of cuttet parts. How to build part#1 Best regrads Eugen 3 Quote Homebuild Projects ASSO X-RAY 600kg version - still in progress QUICKIE Q1- still in progress WWW: https://aerobase.weebly.com PICTURE: https://www.flickr.com/photos/aerobase/ Link to comment Share on other sites More sharing options...
Eugen Posted January 23, 2022 Author Share Posted January 23, 2022 Here we go with main wing ailerons slot with 1 bid and peelply on the top. To reduce the twist there was placed some weight to press it on the flat table. 3 Quote Homebuild Projects ASSO X-RAY 600kg version - still in progress QUICKIE Q1- still in progress WWW: https://aerobase.weebly.com PICTURE: https://www.flickr.com/photos/aerobase/ Link to comment Share on other sites More sharing options...
Eugen Posted April 5, 2022 Author Share Posted April 5, 2022 So far the bottom wing is done and ready to place a frame and switch it on the top side. They was place two peel ply sheet so the top do not get in touch with each area, but the bottom ply fit. 1 Quote Homebuild Projects ASSO X-RAY 600kg version - still in progress QUICKIE Q1- still in progress WWW: https://aerobase.weebly.com PICTURE: https://www.flickr.com/photos/aerobase/ Link to comment Share on other sites More sharing options...
Countach74 Posted April 6, 2022 Share Posted April 6, 2022 Great to see your updates!!! Quote Link to comment Share on other sites More sharing options...
motorfiets Posted April 22, 2022 Share Posted April 22, 2022 @Eugen - Would you be interested in sharing the 3d CAD models you have? Thanks! Quote Link to comment Share on other sites More sharing options...
Eugen Posted April 22, 2022 Author Share Posted April 22, 2022 Sorry, I do not share the 3D models. Quote Homebuild Projects ASSO X-RAY 600kg version - still in progress QUICKIE Q1- still in progress WWW: https://aerobase.weebly.com PICTURE: https://www.flickr.com/photos/aerobase/ Link to comment Share on other sites More sharing options...
Rocket15 Posted April 23, 2022 Share Posted April 23, 2022 Fantastic work...finally getting some time to consider building this plane. What engine are you putting in it? Sorry if you already mentioned it already. Quote Link to comment Share on other sites More sharing options...
Rocket15 Posted April 23, 2022 Share Posted April 23, 2022 Sorry I used your link to read about the engine! very comprehensive. thank you Quote Link to comment Share on other sites More sharing options...
motorfiets Posted April 25, 2022 Share Posted April 25, 2022 On 4/22/2022 at 4:41 PM, Eugen said: Sorry, I do not share the 3D models. What about selling the 3d models? 😁 Quote Link to comment Share on other sites More sharing options...
Eugen Posted December 2, 2022 Author Share Posted December 2, 2022 Some progress ……😃 3 Quote Homebuild Projects ASSO X-RAY 600kg version - still in progress QUICKIE Q1- still in progress WWW: https://aerobase.weebly.com PICTURE: https://www.flickr.com/photos/aerobase/ Link to comment Share on other sites More sharing options...
Countach74 Posted December 4, 2022 Share Posted December 4, 2022 Very Nice Workmanship and Progress!!! Enjoy seeing your updates! 1 Quote Link to comment Share on other sites More sharing options...
Josh Carr Posted December 21, 2022 Share Posted December 21, 2022 Noice!!! So cool to see your progress. Keep up the good work Quote Link to comment Share on other sites More sharing options...
Josh Carr Posted December 26, 2022 Share Posted December 26, 2022 Does anyone know where we can get accurate measurements for the Q1? I bought the $99 pack but didn't realize that this just has the foam cutouts. How you built that 3D model with exact measurements of the quickie is a mystery Quote Link to comment Share on other sites More sharing options...
Eugen Posted December 26, 2022 Author Share Posted December 26, 2022 vor 5 Stunden schrieb Josh Carr: Does anyone know where we can get accurate measurements for the Q1? I bought the $99 pack but didn't realize that this just has the foam cutouts. How you built that 3D model with exact measurements of the quickie is a mystery All information you need to build that aircraft you will find in the Q-Package, in the build plans and in the QAC News Letters. Exact is relative here, however, especially since there are not so many available or active on the Internet who have built a Q1 ……. 1 Quote Homebuild Projects ASSO X-RAY 600kg version - still in progress QUICKIE Q1- still in progress WWW: https://aerobase.weebly.com PICTURE: https://www.flickr.com/photos/aerobase/ Link to comment Share on other sites More sharing options...
Josh Carr Posted January 13, 2023 Share Posted January 13, 2023 (edited) Excuse my ignorance, but that GU canard you are using, with only one strip of carbon for the spar, does that mean that the skin also is used for bending moment? I understand that the LS1 canard can be used for the Q200 and the Q1, but you need a round carbon fibre spar that is hard to come by. The Australian person who used to make it on Quickheads is likely gone on to other things... Edited January 13, 2023 by Josh Carr Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.