Jump to content
Sign in to follow this  
Dennis

Open EZ Rev 6 Plans and Dwgs

Recommended Posts

Are Open Rev 6 Plans and Drawings available?  Have all the Rev 5 documents plus corrections for "1 inch error".  OK to start build with Rev 5 or wait for Rev 6?

Share this post


Link to post
Share on other sites

I downloaded the Rev 5 drawings about 6 months ago in PDF format and had them printed on a large-format printer at a FedEx store and they were right on.  There was some confusion about the corner marks but it was just a problem with the marks, not the base drawings.  I am sure the Rev 5 drawings are right.  I believe the build manual is still available on Ari Glantz's website.

 


-Kent
Cozy IV N13AM-750 hrs, Long-EZ-85 hrs and sold

Share this post


Link to post
Share on other sites

Hey Kent.  Thanks for the follow-up.  Noticed you are from Concord.  Are you by chance based at Mid-Carolina?  If so, I had a look at your planes a couple of years ago.  Friend of mine (Rick Basco) is based there and flew a Onex that he built.  I built a Sonex and used to fly in and out of there to visit.  I was based at Wilgrove.  Recently moved from Charlotte to Eastern NC, sold the Sonex and now ready to have a "real" homebuilt airplane.  Have the build manual so next step is to get the dwgs printed and get going or maybe find a good project or decent completed EZ.  Thanks again.

Share this post


Link to post
Share on other sites

Ah yes.   Did you know Wilgrove is closing?    Sold for development.  

There are a lot of improvements one can make on an EZ but i don’t know of a comprehensive list.    I guess an O-320 and a longer nose are the main change.   It takes a lot of research to find what has been done before.  Check out the projects for sale in my “sales i’ve seen” thread.    Some good values there.


-Kent
Cozy IV N13AM-750 hrs, Long-EZ-85 hrs and sold

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

The Canard Zone

×
×
  • Create New...

Important Information