very easy Posted November 12, 2009 Share Posted November 12, 2009 Hi all, This looks like a good forum to learn about my varieze. Recently brought it over from USA to Australia where I live. One issue with the a/c is that max. indicated cruise speed is 120 kts and the 0-200 continental revs at only 2400 rpm. Adjusted the throttle so the carby opens up more, but no improvement. We at the club think the pich of the prop. is too high. It is 57 " dia but does not have any pich info. The engine has good compression with only 163 hours. Is there anything else I need to check before changing props? Also, some of the tapered wing pins are flush or slightly below the surface. They are .990" max dia. Made one up out of high tensile steel 1.00" dia and it sits ok. Though someone mentioned if the high tensile steel has enough sheer strength. Can you buy those pins in different sizes? Any comments appreciated Thanks, Norm Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.