Jump to content
Sign in to follow this  
vonjet

Complete SQ2000 RG Kit

Recommended Posts

4 place canard. Factory built wings, canard, fuselage, spar. Includes strake skins, cowlings and KLS Retract main gear and nose. Lots of work done already. Gullwing Doors. Engine mount for Lyc. 360.

30K o.b.o.

Share this post


Link to post
Share on other sites

I don't get it. Did you actually make anything?? What will be your next 7 day project?

 

Any pictures, or are the films still at the chemist???


Mark Spedding - Spodman
Darraweit Guim - Australia
Cozy IV #1331 -  Chapter 09
www.mykitlog.com/Spodman
www.sites.google.com/site/thespodplane/the-spodplane

Share this post


Link to post
Share on other sites

HAHA Spodman Your hilarious. I cant stop laughing. Wow, you should do some stand up.....good stuff.

Share this post


Link to post
Share on other sites

Are those flimsyy factory seats included?

You know, the ones that fold forward?

...the ones that killed Paul.

That fuselage folded up like an accordion and flung Paul with that stupid 3 point car seatbelt...

...oh yea, that ride is worth30k.

:mad: :mad: :mad: :mad: :mad:


Self confessed Wingnut.

Now think about it...wouldn't you rather LIVE your life, rather than watch someone else's, on Reality T.V.?

Get up off that couch!!! =)

 

Progress; Fuselage on all three, with outside and inside nearly complete. 8 inch extended nose. FHC done. Canard finished. ERacer wings done with blended winglets. IO540 starting rebuild. Mounting Spar. Starting strake ribs.

Share this post


Link to post
Share on other sites

duplicate post


Self confessed Wingnut.

Now think about it...wouldn't you rather LIVE your life, rather than watch someone else's, on Reality T.V.?

Get up off that couch!!! =)

 

Progress; Fuselage on all three, with outside and inside nearly complete. 8 inch extended nose. FHC done. Canard finished. ERacer wings done with blended winglets. IO540 starting rebuild. Mounting Spar. Starting strake ribs.

Share this post


Link to post
Share on other sites

In fairness guys, if you have a problem with a particular design, it shouldn't be vented at someone building, owning or flying that design. Additionally, the world is in some flux at the moment, so questioning someone why they are selling a project without any back ground information is a little unfair.

 

Now I know all the lines about freedom of speech, but I enjoy this and other forums when there is a constructive (including criticism) tone. I'm sure others do too....

 

Cheers,

 

Bruce.

Share this post


Link to post
Share on other sites

Edge, Your not in the market for an airplane so why are you even in this section.

Yes the seats are included. If your the type of guy who can only build an airplane one way and without the almighty "factory support" then an SQ isn't for you.

Would I use the seats and the current installation. No. It doesn't take a genius to figure out they need some redesign. There are all sorts of things that can be done differently or custom to the builder.

But hey, Cozy's never killed anyone.

Share this post


Link to post
Share on other sites

Hey, youre right, I shouldnt be in this section. I'll shut the door quietly as I leave.


Self confessed Wingnut.

Now think about it...wouldn't you rather LIVE your life, rather than watch someone else's, on Reality T.V.?

Get up off that couch!!! =)

 

Progress; Fuselage on all three, with outside and inside nearly complete. 8 inch extended nose. FHC done. Canard finished. ERacer wings done with blended winglets. IO540 starting rebuild. Mounting Spar. Starting strake ribs.

Share this post


Link to post
Share on other sites

Your right Steve, It is. With Dave's custom designed cowlings it really looks even better.And Paul Lee has gotten most if not all of the bugs worked out on the Main Gear and has his SQ operating nicely for almost 200 hours.

Like Edge has pointed out the Seating set up needs some work. I planned on putting something more permanant in the AC and using the same dual stick setup as the Lancair with Engine controls in the center. Also extending the center keel all the way back to the firewal and to the Canard bulkhead to strengthen the fuselage.

I placed the price high on this one because I was 100% on keeping it and building it as I always wanted one, but My Lancair is getting ready for test flights next week and I might not be interested in doing another project. So my heart is not set on selling the SQ and will keep the price high until I am 100% on giving it up. The workmanship on this one is really nice.

Share this post


Link to post
Share on other sites

reduced 20K

30k originally. Reduced 20k taken literally, means you are selling it for 10k now.


Self confessed Wingnut.

Now think about it...wouldn't you rather LIVE your life, rather than watch someone else's, on Reality T.V.?

Get up off that couch!!! =)

 

Progress; Fuselage on all three, with outside and inside nearly complete. 8 inch extended nose. FHC done. Canard finished. ERacer wings done with blended winglets. IO540 starting rebuild. Mounting Spar. Starting strake ribs.

Share this post


Link to post
Share on other sites

Yeah I realized that but this forum doesn't allow edit or removal of your own post for some reason.

So yeah its 20K asking now.

Share this post


Link to post
Share on other sites

Sure you can edit. For 5-10 mins after you post, there is an edit button down at the right buttom of your post!!


Self confessed Wingnut.

Now think about it...wouldn't you rather LIVE your life, rather than watch someone else's, on Reality T.V.?

Get up off that couch!!! =)

 

Progress; Fuselage on all three, with outside and inside nearly complete. 8 inch extended nose. FHC done. Canard finished. ERacer wings done with blended winglets. IO540 starting rebuild. Mounting Spar. Starting strake ribs.

Share this post


Link to post
Share on other sites

I saw that this time around. I never noticed it before.

 

So now the SQ kit is $20,000. I think I can get it delivered for the buyer and include delivery in the price. Just depends on where buyer is located.

Share this post


Link to post
Share on other sites

Complete SQ2000 RG Kit

Edge, Your not in the market for an airplane so why are you even in this section.

Yes the seats are included. If your the type of guy who can only build an airplane one way and without the almighty "factory support" then an SQ isn't for you.

Would I use the seats and the current installation. No. It doesn't take a genius to figure out they need some redesign. There are all sorts of things that can be done differently or custom to the builder.

But hey, Cozy's never killed anyone.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

The Canard Zone

×
×
  • Create New...

Important Information