Spodman Posted December 31, 2007 Share Posted December 31, 2007 Mmmmmmmmm. Welded all my peel ply together with the Fein, maybe I can use a t-shirt... Quote Mark Spedding - SpodmanDarraweit Guim - AustraliaCozy IV #1331 - Chapter 09www.mykitlog.com/Spodmanwww.sites.google.com/site/thespodplane/the-spodplane Link to comment Share on other sites More sharing options...
Cozy Girrrl Posted December 31, 2007 Author Share Posted December 31, 2007 "The sad result of Drew alternatly reading kitplane magazines and his older brother's Playboy magazines during his formative years, there is know known cure for this fetishistic behavior but Drew's therapist has assured Amy that though it will be a long term relationship, Drew will probably only work on it a few minutes at a time." Quote CG Products www.CozyGirrrl.com Cozy Mk-IV RG 13B Turbo Link to comment Share on other sites More sharing options...
rickh Posted December 31, 2007 Share Posted December 31, 2007 "While holding tab A horizontal, insert pin B into tabs C and D" or: "Maybe I should have used AN hardware..." "I'll just rest here a bit til the flox stiffens up" "Honey, I need another 2ply BID tape" "Clamping the seatback to the sides is a bear..." Rick Quote Rick Hall; MK-IV plans #1477; cozy.zggtr.org Build status: 1-7, bits of 8-9, 10, 14 done! Working on engine/prop/avionics. Link to comment Share on other sites More sharing options...
Cozy Girrrl Posted December 31, 2007 Author Share Posted December 31, 2007 It looks a lot like the results from one of those cartoons from the 50's of a guy trying to set up a deck chair on a sea cruise.... I think the deck chair finally ends up chaising him around the deck. ...Chrissi Quote CG Products www.CozyGirrrl.com Cozy Mk-IV RG 13B Turbo Link to comment Share on other sites More sharing options...
Cozy1200 Posted January 1, 2008 Share Posted January 1, 2008 Mmmmmmmmm. Welded all my peel ply together with the Fein, maybe I can use a t-shirt... I thought I swore you to secrecy on that one. Quote Drew Chaplin (aka the Foam Whisperer) --- www.Cozy1200.com - I'm a builder now! --- Brace for impact... Link to comment Share on other sites More sharing options...
Spodman Posted January 5, 2008 Share Posted January 5, 2008 I thought I swore you to secrecy on that one. Ooops. Shouldn't post while inhaling Spodgrog I expect. Happy New anyhow, and you have to let me back for another plane day to get your videos back:cool2: Quote Mark Spedding - SpodmanDarraweit Guim - AustraliaCozy IV #1331 - Chapter 09www.mykitlog.com/Spodmanwww.sites.google.com/site/thespodplane/the-spodplane Link to comment Share on other sites More sharing options...
Jon Matcho Posted January 6, 2008 Share Posted January 6, 2008 I don't want to say anything nasty but I will buy a beer for who ever comes up with the best caption for this picture of Drew."I got really flocked up last night." Quote Jon Matcho Builder & Canard Zone Admin Now: Rebuilding Quickie Tri-Q200 N479E Next: Resume building a Cozy Mark IV Link to comment Share on other sites More sharing options...
Richard Schubert Posted January 6, 2008 Share Posted January 6, 2008 Originally Posted by Cozy Girrrl I don't want to say anything nasty but I will buy a beer for who ever comes up with the best caption for this picture of Drew. "To sleep, perchance to dream." Quote "We choose to do these things not because they are easy, but because they are hard." JFK Link to comment Share on other sites More sharing options...
Cozy Girrrl Posted January 6, 2008 Author Share Posted January 6, 2008 "I got really flocked up last night."Wouldn't the be "Floxed" ? ...Chrissi Quote CG Products www.CozyGirrrl.com Cozy Mk-IV RG 13B Turbo Link to comment Share on other sites More sharing options...
Jon Matcho Posted January 6, 2008 Share Posted January 6, 2008 Wouldn't the be "Floxed" ? ...Chrissi According to the Long-EZ plans (p.3-6) "Flox is a mixture of flocked cotton and epoxy". So either would work. However, now that I think of it, 'flox' is better and makes more sense since builders spend a lot more time floxing than flocking... but certainly not ****ing. Quote Jon Matcho Builder & Canard Zone Admin Now: Rebuilding Quickie Tri-Q200 N479E Next: Resume building a Cozy Mark IV Link to comment Share on other sites More sharing options...
Hennie Engelbrecht Posted January 6, 2008 Share Posted January 6, 2008 "maybe I do need more clamps" hennie Quote Link to comment Share on other sites More sharing options...
Edge 513 Posted January 7, 2008 Share Posted January 7, 2008 This is just to go on record that given the past...the observation should be made that I had nothing to do with the direction this post has taken... and Chrissi only made an observation., so she has no reproach. Others have proven perfectly capable of thread "entropy";) Quote Self confessed Wingnut. Now think about it...wouldn't you rather LIVE your life, rather than watch someone else's, on Reality T.V.? Get up off that couch!!! =) Progress; Fuselage on all three, with outside and inside nearly complete. 8 inch extended nose. FHC done. Canard finished. ERacer wings done with blended winglets. IO540 starting rebuild. Mounting Spar. Starting strake ribs. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.