Cozy Girrrl Posted October 5, 2007 Share Posted October 5, 2007 At Rough River we previewed our new version of the Long-ez control system. Features: -complete from elevator rod end to the firewall bellcrank (except universal) -all hardware and fasteners included -Cozy Mk-IV type stick grip forks. -sealed ball bearings support the torque tube in 3 places. -all aluminum parts are alodined or anodized. -all steel parts are cadmium plated. This assembly is available custom built to size or with tubes up to 6" longer for custom fit to longer fuselages. The hardware and instructions make this easy for both new builds and retrofits. Quote CG Products www.CozyGirrrl.com Cozy Mk-IV RG 13B Turbo Link to comment Share on other sites More sharing options...
Waiter Posted October 5, 2007 Share Posted October 5, 2007 Very Nice :-) Waiter Quote F16 performance on a Piper Cub budget LongEZ, 160hp, MT CS Prop, Downdraft cooling, Full retract visit: www.iflyez.com Link to comment Share on other sites More sharing options...
Cozy Girrrl Posted October 5, 2007 Author Share Posted October 5, 2007 The firewall ball bearing assembly is a very easy retrofit. -fill bronze bushing with micro. -drill a 1/4" diameter hole though michro in center. -use typical hardware store type 1 1/2" diameter hole saw with 1/4" diameter drill arbor to drill out bronze bushing and make new hole. -assemble bearing on tube and flox ribbed bearing holder in place in firewall. Bearing is retained with an e-ring. Quote CG Products www.CozyGirrrl.com Cozy Mk-IV RG 13B Turbo Link to comment Share on other sites More sharing options...
Nathan Gifford Posted October 5, 2007 Share Posted October 5, 2007 It look very nice at RR and if they didn't have a client already for the one they built, it would have been sold off. Quote Nathan Gifford Tickfaw, LA USA Cozy Mk IV Plans Set 1330 Better still --> Now at CH 9 Link to comment Share on other sites More sharing options...
lancehooley Posted June 1, 2008 Share Posted June 1, 2008 I got my control system from CG Products and it is really smooth. I used their firewall bearing also. It can not be compared to the standard Long installation...it's far superior. My installation uses taper pins instead of bolts. They take the rest of the slop out of the system. Quote Link to comment Share on other sites More sharing options...
BLUE MAX Posted June 2, 2008 Share Posted June 2, 2008 I bought one too. I really like the bearings and the forked handles. Everyone needs to buy one!!!! Quote Tom McCormick http://tomslongez.com Almost done the nose section. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.