Jump to content
Sign in to follow this  

Spar Template Orientation

Recommended Posts

To verify the spare is shaped correctly before installing the shear web we are to utilize spar templates. Each template is to be loacated at a specific "BL location.


My interpretation is that the templates should be placed along a specific "BL" line. This means the templates are all oriented parallel to each other as you go out from BL = 0, 37, 52, and 67.5. This means the templates are not perpendicular to the aft face of the spar at BL= 37, 52, and 67.5. If anyone remembers please verify I'm seeing this correctly.


Also, please verify the depth of the spar caps will be 3" deep into the top and bottom faces at all locations.



Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

The Canard Zone

  • Create New...

Important Information