Jump to content
Sign in to follow this  
dust

installing main spar

Recommended Posts

Learned this years ago on the listserv.

 

the wings are heavy on the back side of the spar, we did two things

 

1 two level blocks bondoed onto spar for future level reference, both back to front and left to right

 

2 installed spar down in the front by .2 degree, when the wings are attached, the weight of the wings makes the spar level after wing attachment.

 

enjoy the build

 

dust


maker wood dust and shavings - foam and fiberglass dust and one day a cozy will pop out, enjoying the build

 

i can be reached at

 

http://www.canardcommunity.com/

Share this post


Link to post
Share on other sites

Just out of curiosity... does this set up the correct angle while parked on the ground or while flying?


Andrew Anunson

I work underground and I play in the sky... no problem

Share this post


Link to post
Share on other sites

well, we installed another wing (the third) on plane day, with the spar forward be .2 and put the level on the wing and again0.0, life is good

 

enjoy the build

 

dust


maker wood dust and shavings - foam and fiberglass dust and one day a cozy will pop out, enjoying the build

 

i can be reached at

 

http://www.canardcommunity.com/

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

The Canard Zone

×
×
  • Create New...

Important Information