Jump to content

Which fuel Sending unit for fuel tank


dust

Recommended Posts

Can i say more than that, we are assemblying the items we need for the fuel system back to the firewall.

 

We are using 1/2 inch OD tubing to and from a double throw valve at the center position and also need to install sending units in the tank, so whats who using???

 

 

Enjoy the build (we are)

 

Mike

maker wood dust and shavings - foam and fiberglass dust and one day a cozy will pop out, enjoying the build

 

i can be reached at

 

http://www.canardcommunity.com/

Link to comment
Share on other sites

DAAAAAAA just went to blue mountain and found this

 

Van's makes things that work well for not a lot of money. His capacitive fuel level sensors are simple, elegant and cheap. These modules turn the capacitance into a voltage the EFIS can read. You need one for each sensor, sold as a pair.

 

140 for the pair

 

Sounds like a plan

 

Any nays??

 

enjoy the build

 

Mike

maker wood dust and shavings - foam and fiberglass dust and one day a cozy will pop out, enjoying the build

 

i can be reached at

 

http://www.canardcommunity.com/

Link to comment
Share on other sites

Well ifin i am relying on blue mountain, i guess i can trust thier stuff.

 

The prices i found were

 

160 recreationalmobility.com

 

175 Composite Design

 

And the winner is

 

140 blue mountain as dealer for vans

 

 

Enjoy the build

 

Mike

maker wood dust and shavings - foam and fiberglass dust and one day a cozy will pop out, enjoying the build

 

i can be reached at

 

http://www.canardcommunity.com/

Link to comment
Share on other sites

  • 4 weeks later...

OK time to correct this post, i thought blue mountain sold the probes, they don't. What they sell for 140 is a pair or circut boards that takes the 0 to 5 volt signal that the tank unit sends and converts it to what blue mountain can then use.

 

Sooooooooooooo, they recomend units sold by westberg mfg aka westach 1-800-400-7024

 

12" bendable probes 3955sb-5 and 108.5 each

 

enjoying the design

 

Mike

maker wood dust and shavings - foam and fiberglass dust and one day a cozy will pop out, enjoying the build

 

i can be reached at

 

http://www.canardcommunity.com/

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information