dust Posted June 8, 2003 Share Posted June 8, 2003 So where do we get them from? Quote maker wood dust and shavings - foam and fiberglass dust and one day a cozy will pop out, enjoying the build i can be reached at http://www.canardcommunity.com/ Link to comment Share on other sites More sharing options...
Wayne Hicks Posted June 8, 2003 Share Posted June 8, 2003 Are you talking about the teflon hinge kit offered by Gary Hall? His Experimental Aircraft AILERON / RUDDER HINGE RETROFIT KIT prevents additional wear on experimental aircraft hinges. The hinge kit fits any MS20001-P3, '-P4', '-P5', or '-P6' extruded aluminum piano hinge that is specified for use on the Long-Ez, E-Racer, VariEze, Defiant, Cozy, Solitaire, Lancair, Pulsair or Glasair ailerons and/or rudders. The kit contains enough Teflon spaghetti tubing and a special high grade stainless spring steel wire for all the hinges used in the ailerons and rudders. You can contact him at: GARY A. HALL Work: (954) 979-9494 FAX: (954) 975-8018 (USlan Corp) gary.hall@uslan.com http://www.uslan.com/hinge-kit.html =========== Wayne Hicks Quote Wayne Hicks Cozy IV Plans #678 http://www.ez.org/pages/waynehicks Link to comment Share on other sites More sharing options...
dust Posted June 8, 2003 Author Share Posted June 8, 2003 Thhats what i mean't, will buy them this week Thanks Quote maker wood dust and shavings - foam and fiberglass dust and one day a cozy will pop out, enjoying the build i can be reached at http://www.canardcommunity.com/ Link to comment Share on other sites More sharing options...
dust Posted June 9, 2003 Author Share Posted June 9, 2003 well, I could have just looked on the front page of EVERY quarterly newslatter and not bothered the group Quote maker wood dust and shavings - foam and fiberglass dust and one day a cozy will pop out, enjoying the build i can be reached at http://www.canardcommunity.com/ Link to comment Share on other sites More sharing options...
fshort Posted July 30, 2021 Share Posted July 30, 2021 Hi all: I just found this post. I wanted to let anyone reading this that I bought the hinge pin repair kit business from Gary Hall. My contact info: James Russell Electric Shadows, Inc. 841 Old Gardiner Rd. Sequim, WA 98382 USA (817) 691-5465 C fshort@flash.net I have attached a info sheet. Regards, James Hinge Repair Kit COVER PAGE (rev F).pdf 1 Quote James Russell Electric Shadows, Inc. 841 Old Gardiner Rd. Sequim, WA 98382 USA Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.