Jump to content

Nose gear cover

John Slade

Recommended Posts

In response to Mike's request for tips and tricks, here's one...

You'll probably need a number of wires (or even pipes) that come along the center console, then go up the forward side of the panel in the center. I made my nosewheel cover flat at the aft end so that there's only a 1 inch gap between it and the panel. This has become my own personal little hell hole. Perhaps I should have tailored the cover to match the space required by the nose wheel as it comes up. One thing for sure - I need more room in front of the panel at the center console for wires and pipes.

I can be reached on the "other" forum http://canardaviationforum.dmt.net

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...

Important Information