I have had many requests for details from the Subaru Shop Manual so I have
scanned the relevant sections and included them in PDF format within this
section. Notice that not all sections are included and it should also be noted
that some of the electrical detail is incorrect in particular with respect to
the way power is applied. I believe that there was an update to the manual in
which these errors were corrected. Surprisingly enough it makes very little
difference when applying it to an aircraft installation since the power should
be switched as one and no residual power should be connected to the ECU once the
ignition is switched off.
 |
This section is the generic heading section 7 pages in length and of
135kB in size. Click on the image to the left to view the section. |
 |
Section 2.1 describes the emission control system and vacuum
fillings. It is 13 pages in length and of 314kB in size. Click on the
image to the left to view the section. |
 |
Section 2.2 describes the on-car services. It is 7 pages in length
and of 214kB in size. Click on the image to the left to view the
section. |
 |
Section 2.3 describes the mechanical elements of the engine. This is
the heart of the engine and will probably be of most interest. It is 79
pages in length and of 2.4MB in size. Click on the image to the left to
view the section. |
 |
Section 2.4 describes the engine lubrication system. It is 14 pages
in length and of 360kB in size. Click on the image to the left to view
the section. |
 |
Section 2.5 describes the engine lubrication system. It is 15 pages
in length and of 388kB in size. Click on the image to the left to view
the section. |
 |
Section 2.7 describes the engine lubrication system. It is 114 pages
in length and of 2.2MB in size. Click on the image to the left to view
the section. |
 |
Section 2.8 describes the fuel system. It is 21 pages
in length and of 470kB in size. Click on the image to the left to view
the section. |
 |
Section 6 describes the electrical system methodology. It is 7 pages
in length and of 131kB in size. Click on the image to the left to view
the section. |
 |
Section 6-1 describes the electrical system ancillary components and
the relevant service data. It is 22 pages
in length and of 560kB in size. Click on the image to the left to view
the section. |
 |
Section 6-2 describes the electrical lighting loads for the
indicator lights. It is 2 pages
in length and of 48kB in size. Click on the image to the left to view
the section. |
 |
Section 6-3 provides the wiring schedule for the ECU. It is 5 pages
in length and of 124kB in size. Click on the image to the left to view
the section. |
