DouglasHolub Posted May 1, 2018 Share Posted May 1, 2018 I'm replacing the nose strut on my Velocity. It's a Cozy Mark IV nose strut. I can't remember how many plies of BID are used to wrap it. Is it just one ply in each direction so that there are two plies overlapping on the sides? Doug Holub 2009 Velocity FG w/ electric nose lift Quote Link to comment Share on other sites More sharing options...
Kent Ashton Posted May 1, 2018 Share Posted May 1, 2018 The Cozy calls for two plys of BID. First ply wraps the aft surface + two sides. Peel ply and allow to cure. Next ply wraps the front surface + two plies. Wow, been a long time since I did those, I would have bet it was a few more wraps but no. Quote -KentCozy IV N13AM-750 hrs, Long-EZ-85 hrs and sold Link to comment Share on other sites More sharing options...
DouglasHolub Posted May 2, 2018 Author Share Posted May 2, 2018 Super. Thanks a million. Doug Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.