Jump to content

cozy mk3 parts wanted


Recommended Posts

Kim,  You might want to make a handle if you have the tools because (1) you will have to weld or rivet a shaft later on it later and (2) the plans handle needs a mod to keep it from rotating which requires some welding.  Below is a handle with a long nut drilled out and welded on it.  The nut passes through a suitable ratchet wrench that is adapted to the instrument panel.

 

For the landing brake, I have installed both the manual brake and the electric brake and the electric one is only a few ounces heavier and easier to install, IMO.  There are very few parts to make for the electric brake and there is a fair amount of fiddling to install the cable-operated mechanism on the manual brake.  If you need the actuator number, I will look it up for you.

post-126542-0-06798400-1508507449_thumb.jpg

post-126542-0-32813700-1508507490_thumb.jpg

  • Like 1

-Kent
Cozy IV N13AM-750 hrs, Long-EZ-85 hrs and sold

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information