zahid Posted June 1, 2016 Share Posted June 1, 2016 Hi I am looking for Ganzer Gemini plans , the side by side two seater push pull configuration canard Thanks Regards Zahid Quote Link to comment Share on other sites More sharing options...
zahid Posted June 1, 2016 Author Share Posted June 1, 2016 hi, I am looking ganzer gemini plans Regards Zahid Quote Link to comment Share on other sites More sharing options...
Marc Zeitlin Posted June 1, 2016 Share Posted June 1, 2016 I am looking ganzer gemini plansNo plans were ever published. It was a one-off. Quote Marc J. Zeitlin Burnside Aerospace marc_zeitlin@alum.mit.edu www.cozybuilders.org copyright © 2024 Link to comment Share on other sites More sharing options...
Jon Matcho Posted June 8, 2016 Share Posted June 8, 2016 I doubt there are any as this was a one-off project. http://stargazer2006.online.fr/aircraft/pages/gemini.htm Quote Jon Matcho Builder & Canard Zone Admin Now: Rebuilding Quickie Tri-Q200 N479E Next: Resume building a Cozy Mark IV Link to comment Share on other sites More sharing options...
Jon Matcho Posted June 9, 2016 Share Posted June 9, 2016 I just caught that there were two threads, so I merged into this one. A one-off E-Racer-sized Defiant-like custom... still impressive. Quote Jon Matcho Builder & Canard Zone Admin Now: Rebuilding Quickie Tri-Q200 N479E Next: Resume building a Cozy Mark IV Link to comment Share on other sites More sharing options...
EracerFL Posted June 13, 2016 Share Posted June 13, 2016 Here are a few images and a article on the Gemini GeminiPlans.zip 1 Quote Link to comment Share on other sites More sharing options...
Jon Matcho Posted June 21, 2016 Share Posted June 21, 2016 Nice, everything you need to build one! That was from the golden era of EZs... Quote Jon Matcho Builder & Canard Zone Admin Now: Rebuilding Quickie Tri-Q200 N479E Next: Resume building a Cozy Mark IV Link to comment Share on other sites More sharing options...
ganzerd Posted August 5, 2016 Share Posted August 5, 2016 I'm impressed! Someone still has my old 3 view! Yup..A guy that had built a couple EZ's could just about build from that drawing....just about.... But.....You need to use at least 100hp at each end.... And that canard didn't work very well. I built a new one with a Roncz airfoil that had about 70% of the original area and flew much better...look at the later pictures on Stargazer.... DaveG 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.