rickh Posted January 2, 2010 Share Posted January 2, 2010 Bake at 225 F for 5-7 minutes, form. Picture shows a quarter for reference, and my female mold (marble mortar), the final part made from a scrap of 3/8" H-45. Also attached is a Divinycell product PDF. Application might include pre-forming foam for Cozy-Girl strakes, radomes, nose cones, ... Rick Diab.HManM.pdf Quote Rick Hall; MK-IV plans #1477; cozy.zggtr.org Build status: 1-7, bits of 8-9, 10, 14 done! Working on engine/prop/avionics. Link to comment Share on other sites More sharing options...
Limo EZ Posted January 4, 2010 Share Posted January 4, 2010 Rick, I have found that the larger the foam piece is tha longer the dwell time before you try to form it. The bottom of my project was done by heating a flat sheet of PVC foam inside of a female mold inside a vacuum bag inside of an oven set to 250 degrees F. I let it sit at 250 and then pulled vacuum. Joe Berki Limo EZ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.