steve Posted December 12, 2009 Share Posted December 12, 2009 just set up the wings so i can drill the spar. after setting up a water level it looks like the wing fits the spar fine, but the water is off by 1/2" Wing tip low. if i fix the wing so the water line 17.4 is right then i have the root of the wing a little lower then the spar 1/4". can i build the plane with the wing tips 1/2" low ? or do i fill the strake ? Quote Steve M. Parkins Link to comment Share on other sites More sharing options...
steve Posted December 13, 2009 Author Share Posted December 13, 2009 i have drilled the top outer bolt hole, and have it snug. i have lifted the wing tip so the water line is dead on the forward LE. i can see a smidgen(3/16") of the wing sticking down past the spar root. i think this is the best i can get it. i will now drill the lower/outer and inner bolt hole. PS. i had to grind out a little glass to get the nut on, any tricks to getting glass back in side the hole ? or will flox do it ? Quote Steve M. Parkins Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.