Jump to content

Mags at high altitudes


Recommended Posts

From another thread

( I would say you really need EI to go high, unpressurized Mags start missfiring as you increase altitude. I have had mags (bendix) do OK at FL180, but the current mag I hav starts missfiring at FL150 and is completely dead by the time I get to FL180)

 

I don't get that. Magnetos are basically a magnet, a turning coil, and a cam-operated switch. How would altitude and atmospheric pressure figure into their operation?

Link to comment
Share on other sites

Not so ...

 

if that were the case planes fitted with these would not fly public, would not be cleared for IF etc.

 

There would also be a warning on the installation papers etc.

 

I have taken mine to 19500 and no evidence.

I live in my own little world! but its OK, they know me here!

Chris Van Hoof, Johannesburg, South Africa operate from FASY (Baragwanath)

Cozy Mk IV, ZU-CZZ, IO-360 (200hp) 70x80 prop

Link to comment
Share on other sites

Please google

 

"Pressurized Magneto"

 

I've had standard unpresurized Bendix mags work OK up to FL210, I've also had standard unpresurized Bendix mags start misfiring at FL150 and become totallly inoperative by the time I'm up to FL180.

 

Waiter

F16 performance on a Piper Cub budget

LongEZ, 160hp, MT CS Prop, Downdraft cooling, Full retract

visit: www.iflyez.com

Link to comment
Share on other sites

From another thread

 

 

I don't get that. Magnetos are basically a magnet, a turning coil, and a cam-operated switch. How would altitude and atmospheric pressure figure into their operation?

 

Air is an insulator. It keeps the sparks from flippping to the wrong plugs as the distributor thingy rotates around hoping to spark the right Champion. As the air gets rarer with altitude the sparks can take an errant path.

 

Note that when plugs are tested in a plug tester, this is done at high pressure, not specifically to simulate the conditions in the cylinder at compression but to make the insulator between the electrodes (pressurized air) as great as possible to determine if the plug is misdirecting its energy to another place.

I Canardly contain myself!

Rich :D

Link to comment
Share on other sites

So it appears I stand corrected ...

I live in my own little world! but its OK, they know me here!

Chris Van Hoof, Johannesburg, South Africa operate from FASY (Baragwanath)

Cozy Mk IV, ZU-CZZ, IO-360 (200hp) 70x80 prop

Link to comment
Share on other sites

So it appears I stand corrected ...

I would say "better informed" ;)

 

If your engine starts running a little rough at altitude, but seems to clear up when you descend, this is probably the culpret

 

Waiter

F16 performance on a Piper Cub budget

LongEZ, 160hp, MT CS Prop, Downdraft cooling, Full retract

visit: www.iflyez.com

Link to comment
Share on other sites

So I'll be looking out for that during my climb tests :)

 

Thanks for the advice!

I live in my own little world! but its OK, they know me here!

Chris Van Hoof, Johannesburg, South Africa operate from FASY (Baragwanath)

Cozy Mk IV, ZU-CZZ, IO-360 (200hp) 70x80 prop

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information