spitzy Posted September 6, 2006 Share Posted September 6, 2006 Looks like it's going to be pretty tough to get a good layup in that box given all the right angles... Any suggestions or experiences with that? Quote Link to comment Share on other sites More sharing options...
Wayne Hicks Posted September 6, 2006 Share Posted September 6, 2006 Yeah, cut darts in the portion of the layup that goes in the corner. I made a paper pattern of the entire inside area, including where to cut the darts. I wet out the glass on my work bench, then cut the glass according to the template. Then I transferred the entire layup into the spar. I call it the layup transfer method. Quote Wayne Hicks Cozy IV Plans #678 http://www.ez.org/pages/waynehicks Link to comment Share on other sites More sharing options...
Wayne Hicks Posted September 6, 2006 Share Posted September 6, 2006 Here's a sketch on how to cut darts for those who haven't done this before. Quote Wayne Hicks Cozy IV Plans #678 http://www.ez.org/pages/waynehicks Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.